Browse by brand, ask questions, or call 1-336-969-0110 for faster service.
Found 3015 results.
Showing page 4 of 61.
Tom R: I have a PWM Motor Controller card from a Proform treadmill that seems to be not working. Please email me. Thanks
Reply
EDDY MEDINA: I have an MC-70 motor controller that is not working from a Reebok ACD2 treadmill and I would like to know how do I get this part repair or replace. Please call me at your earliest convenience at (1917)662-2892 or email me asap. Thanks EDDY MEDINA
Reply
J. Haag: I have an ICON MC-70 motor controller for an IMAGE 10.8q treadmill (IMTL 19372), serial #K23693147 that requires repair as the controller is not functioning correctly. I believe the ICON part number for this controller is #152004. Do you fix these motor controllers?If so, what is the price range for the repair work?Lastly, who manufactures these controllers. I am sure it is not ICON.
Reply
hamed: Dear Sir, Mam,I have a treadmill icon health & fitness and it is damaged so I open the cover and see the board with this model MC-70 Aw.revPart #124438 damaged .I have a qouestion:Two parts of this board are damaged and I cant read the part number on them.so please let me know the parts number(dz1 and dz4) or send me electrical drawingthanks and best regardshamed
Reply
Xhuneyt: I have a problem with a motor controler for waching machines, and i wanted you to help me about this. It has not enough force to roll the clothes. I changewd the chip, but it is still not working properly. The code: 3 560 332 06
Reply
Jeff Haag: I believe my MC-70 controller board may be bad. Do you repair these boards? Is this board manufactured by Procond Elettronica?Thanks.
Reply
lou broder: i am getting error message 21. any clue on what is wrong?
Reply
John Kennedy: My 10.6QI just stopped-no warning. When I start it it it makes a mild thumping sound- The display works ok. I want to fix it
Reply
PAUL MITCHELL: HI THERE COULD YOU TELL ME THE PRICE FOR A NEW PART FOR A PROCOND ELETTRONICA PART NO 411122430 OUT OF A ZANNUSI WASHING MACHINE.MANY REGARDS PAUL.
Reply
roger moutal: Hi,COULD YOU TELL ME THE PRICE FOR A NEW PART FOR A PROCOND ELETTRONICA PART NO 451511735 . AND ALSO THE PRICE FOR A TRANSPORTATION TO FRANCE.THANK YOU
Reply
Gianfranco Manunta: Hi,COULD YOU TELL ME THE PRICE FOR A NEW PART FOR A PROCOND ELETTRONICA PART NO 356071101 - LABEL NO 452650111 - FOR Ariston dishwasher LSI 66 A. AND ALSO THE PRICE FOR A TRANSPORTATION TO ITALY.With regards, GIANFRANCO MANUNTA, via M. Macchi 87 - 20124 Milano - ItalyTHANK YOU
Reply
Velazquez: I have some problems with my dishwasher Ariston LSI 66A, it seems the elettronic control does not work 45650110.It 's possible to buy it on line? How does it cost?
Reply
DOENLEN: BONJOUR,COULD YOU TELL ME THE PRICE FOR A NEW PART FOR A PROCOND ELETTRONICA PART NO 356066303-FOR SIEMENS REFRIGERATOR REF KI24L451FF 01?BEST REGARDSGUY DOENLEN
Reply
DIEHL: Hello,Could you tell me the price for the Procond Elettronica Part no 3560061009 ( V16 ) for a refrigerator Vedette RC306.I only need the electronical cartBest RegardsMr DIEHL
Reply
SCHROETTER : Hello,Could you tell me the price for the Procond Elettronica Part no 3560066303 for a congelator SIEMENS .I only need the electronical cart .I am also ready to do a standard exchange if possible . Best RegardsMr SCHROETTER
Reply
tamgho kevin : j 'ai besoin de savoir combien coute cette carte
Reply
Orukwo Amaechi: Please get me quote urgently for a Procond Ellectronica capacitor switch of 0.25 micro farad with part no 411135901 for dish washing machine. We need it to replace the faulty one on our dish washing machine with the following specification:ELX Model: LS9PPN: 9CGX50502215EL: AC 400 V3 N AC 230V 3 50HZSER NO. 64500023POWER: 10.2 KWIPX4YEAR 2006
Reply
Andrew Walford: Hi can you gve me a price for the above, cheers
Reply
brunner gerhard: please tell me for what application ist this part used?thank you
Reply
danno: Hi,Do you have a line filter made by Procond Elettronica # 411.10.5040this is in a Varian Turbo V 550 pump controller.
Reply
Duncan Macaskill: Hello can u give me a price for part number 411122430 Procond Elettronica this is out fo a Bendix Washing machine
Reply
kevin: DEAR SIRS,COULD YOU TELL ME THE PRICE FOR A PROCOND ELETTRONICA PART NO. 411624430.MANY REGARDS KEVIN
Reply
salvatore rassu: Hi,Got a zanussi jet system 1400 xc and i am looking for the electronic board 45151005112430381 5If you have this part ? How much with the shipping to the uk?Looking to speak to you.RegardsSalvatore
Reply
Sergio Dratwa: Elevation motor is working properly, drive motor does not starts.There are 2 diods that are burn: DZ1 and DZ4 (in between the relay and what look like to be 2 ceramic resistors). There is an overheat area on PCB under these diods, but PCB still OK.Would you sell me just the diods?If not, how should I proceed?Thank you,Sergio - Ace Fitness Repair Inc
Reply
henry gutierrez: MORNINGYOUR HAVE PARTS ELETRONIC OF TRADMILL AND BICYCLE UNIVERSAL MUCH MODELS FOR REPAIRTHANK YOUSINCERELYHENRY L.R. GUTIERREZ
Reply
John McGeady: think we need a new transformer, which has procond eletrrronica written on itcan you assist ?
Reply
ronnie byrne: hi i am looking for card for zanussi zwn 1220w washing mc procond ecettronica type procond 451516703type assembly 132191513type e board 124307062sw vwr uda30202t70 wk 48 08
Reply
A. Redd: Proform 725si (PFTL 72560) board ID 170-0518 rev. 2.Do you have replacement board (new or refurb.)? What is the cost to repair?
Reply
gerardo aldape salas: i need repair a module 170-0518 rev.2 im live in mexico
Reply
Ged McDaid: My treadmill seems to wish to go max speed regardless I have tested the potentiometer it is ok Can you repair the mc-76?Can you supply to the uk?Cheersged
Reply
Charles Ray: I have a sears treadmill with mc-70 motor controller #124438 that has shorted diodes. I would like to have a price on repairs or replacement.Thanks Charles
Reply
KEVIN DRESCH: PARTS FOR : PNEUMERCATOR CO MODEL WTI SERIAL # 40613DESIGN C5-S-7S DWG # 4190PLEASE ADVISE PRICE & DELIVERY50 EACH ITEM # 50 TUBE WASHER ( matri-synthetic rubber )THANKSKEVIN DRESCHMY REF SS CLEVELANDREQN E-05101
Reply
Robbie Powers: We have bulk diesel fuel tank with a Pneumercator Mod. P-29, Ser. P2526 that 's not working properly. Would like to get parts illistration and part number listing to assist in repair. Is this info available via internet ?Thank you,R. Powers
Reply
gino gonzalez: I am inquiring as to your PNEUMERCATOR ES825-200F DiscriminatingSump, Dispensor Pan, Dry Annular i need the pricing. thank yougino...
Reply
Joseph Krug: I received the MC-70 motor controller board back today. It works perfectly, and I wish to thank you for your one-day turn around time and quick return shipping. Your service is better than you advertise, which is unusual and greatly appreciated.Thank You again!!!A very satisfied customer!!
Reply
kenneth Anderson: I would like to thank the people and Industrial Electronic Repair for repairing a mc-70 motor control boad. I was working on an elderly couples treadmill and found the control board defective, when I contacted Industrial I explained how they were elderly and didn 't have a lot of money. Industrial offered to fix it for free and even paid return shipping. I have installed the new part and the people are real happy with their treadmill. Thanks Kenny
Reply
Sebastian Voss: Hello,I have a refrigerator and inside ist a plateType Procond 452747163 sw NGBF0A1L242523719 ERF2000P-01.D 220 240V 50Hz - ERF2000PBon this plate is the part, which ist marked with "T1 " (a transformator)broken.Can you sell it to me, and what is the price.ThanksSebastian Voss
Reply
Sonny Ta: I need to find out what is the repair or replacement cost for this part , part # 124438, and the turn around time if I send it in. What is the best way to send in the part for repair ?orIf I decide to buy the part, how much would it cost ? Include shipping and Handling .Thanks.Sonny
Reply
Keith Haufler: I am having trouble with my powertread nordictrack treadmill PT 6.0 and have traced power into the controller. I checked the DC motor by hooking it up to a drill battery and it works fine. What part usually fails on these things? If I need to a replacement, what will it cost? Is it cheaper to send you this part and let you repair it? I noted the DZ1 and DZ4 parts were discolored and replaced them but without any luck. The problem may be in the logic chip. What is the best way to send in the part for repair ?orIf I decide to buy the part, how much would it cost ? Include shipping and handling. Thanks, Keith
Reply
Kevin C McCurrie: Hi, I had the code E21 and had a repair service check all of the components. They concluded that the console had to be replaced and it isn 't made anymore. I found one seller for $499.00 and it is too much. Its a shame because it was a good treadmill.
Reply
Tim Cumings: I have an error code e21 on my treadmill. I found that the speed sensor wire was broken off the screw on the motor attachment. Do you have one and how much is the cost. Thanks
Reply
jivat: The treadmill IMAGE 10.6Q has the KEY missing.Can you please provide us the Key or recommendwhere I will be able to get it.Thanks
Reply
roberto arreola: Iwant to now the price in this part
Reply
Andy Bren: I am an electronics tech and I am attempting to repair this MC-70 controller board. Do you have schematics on .pdf you could email me? I would sure appreciate it.Also I noticed you are hiring. Perhaps I could do some work for you on the West coast. I tried calling the number but I only got a busy tone multiple times. If you are interested please contact me at andy.bren@astronics.comThank you.Andy Bren
Reply
james bryan: we need to t know the replacement cost for this item.Brand:gepruft#vc50er 9pi2004-22-lch3105
Reply
Dan Baldauf: I have a treadmill that when turned on starts slowly for about 1 minute and then shuts down. it displays an Er2 error message. Any thoughts on what is wrong the cost it might be to fix it.????Dan
Reply
freddy: Tengo problema con mi treadmill. aparece en la pantalla E2 lo que no permite que funcione mi treamill. Que debo hacer, por favcor ayudenme.gracias. espero su respuesta
Reply
Howard Karloff: I have two broken Proform MC60 motor controllers. How much wouldit cost to fix them?
Reply
Duanna Jorgensen: I have an AMF 7 day Paragon Timer. It controls my motor on my septic system. The problem is that it seems to run continuous, and I have no book to explain to me how to set the timer. Is there a way to find a manual that will explain this to me? I bought the house, and the system was already in. I have not been able to find anyone that seems to know anything about this.ThanksDuanna
Reply
freddy: Tengo un treadmill Image 10.6Q, aparece en la pantalla E2. y no funciona mi treadmill. que debo hacer. por favor ayudenme. gracias
Reply
Steve Wolterstorff: Can you give some idea of a price for testing and repairing if necessary a Positron unit, model #751233 2A? I have two units that need to be tested. Missouri River Energy Services, 605-338-4042
Reply
JIM KITSON: I HAVE A PAVID GEN SET MODEL J13GAW-HNEED WIRING DIAG. TO CHANGE FROM 480V 3 PHASE TO 240V 3 PHASETHANKSJIM KITSON
Reply
Joe K: I don 't know if you found the information on re-straping your generator or not but if you still need a print, e-mail me and I 'll send you what you need.
Reply
R C Engines: We have a C18H3 M-G set and we are looking for a wiring diag. Can we purchase a copy of the diag. from your company? We are having problems with the output voltage. Please email us if you can be of asst. Thank You
Reply
Faith Epp: I have a pavid 45 kw generator head, (no engine yet) . It is a 12 wire set that I am told can be wired for 1,2,and 3 phase. It is presently wired 3 phase, parallel Y, 4 wire. Can someone tell me the wiring format for 120 240 single phase, 3 wire? my wires are marked T1-T12.I am aware that I may need to rewire some of the meters but I 'll deal with that later. Right now I just need to know where the T wires go. thanks
Reply
STACY REED: Hello,I was wondering if you can provide me a manual for the Teledyne Pines machine?thank you
Reply
martha\'s Design Center: Out-put wiring information. Using Generator for back-up power for manufacturing business. Power 3 phase...
Reply
Stan: We are looking for a starter motor for a model G18H3 Pavid generator. The serial number is 2227.
Reply
Jeff Slayton: I have an engineer interested in learning more about an old Pravid generator system - where were they made? are parts still available?
Reply
Fred Santizo: Dear Sir Madam:I need a device with tree switches. It must create the PWM to control the speed of a treadmill motor controller. One of the switch will turn on off the treadmill the other two will be use to increase decrease the speed of the motor or the treadmill. I want to eliminate the console of a treadmill that uses an mc70 motor control. The MC70 comes with a power supply of 12vdc and 5vdc that can be use for the PWM to control the motor controller. Please email me with any question and more detailed info. Thanks for the time that you will put into this matter.Fred Santizo
Reply
Marco Garcia: I need schematics for the MC-70 for Proform 985 CD treamill. Where can I get a copy?
Reply
Nestor Juguera: need schematics for the 356069403 for even microwave delonghy mw605 3. Where can I get a copy?
Reply
János Madarasz: Wellcome!I would like to know conecting up of 356069403 microwave.How can you help me ?Sincerelly János Madarasz
Reply
Moti: Wellcom! I have a burnt component ty1. I need the component no ' of this part.
Reply
C Westerhof: manual ge procond 356092103
Reply
Jørgen Toft-Petersen: HI ThereI need a schematic over the above PCB. It is siiting in a Atlas NFS242 frezer
Reply
Knud Oellgaard: HiWhere can I get a new electronic thermostat print to my Atlas NFS242
Reply
Lloyd Anderson: Howdy! I was hoping to find out whether my procond board made to you folks through the mail and if so what the turnaround time might be. thanks, Lloyd
Reply
marcus thomas: What are the type and specs for the Diodes on this Controller board? They are located in the DZ1 and DZ4 positions. Also, is the resistor that is located ajacent to these Diodes the best size? if not what do you recommend?
Reply
Andrew: Depending on the version you have....DZ2 = 3.9V 1 2Watt (replace with higher wattage)DZ1 = 15V 1 watt (replace with 5 watt)DZ4 = 24V 5 watt-OR-New versions haveDZ4A and DZ4B = 12v 5 watt eachResistor is 1K, I replaced it with a 10Watt wire wound 5%.
Reply
Bobby: Replaced the diodes like all others. Replaced the big resistors as well. Still not working. Getting 130v out from the motor + - but the motor isn 't turning. There is a lot of corrosion near this board, as if the previous owner spilled something and maybe shorted out the board. Is there supposed to be a resistor in R17 near the heatsink at the opposite end of the input power resistors. Also, is JP2 supposed to be jumpered like JP1 is? My jumper had been severed at some point. Thanks
Reply
Jim Cox: There is no resistor in R17 and JP1 and JP2 should be jumpered. What value do you have for R57?
Reply
Larry Nadler: Got the board back and it works great! Amazing turn around time....you got in on a Friday and I had it back the next Wednesday....Unheard of especially with a check in the box for payment! Did you change anything else besides those 2 Zener diodes to heavier duty components? Thanks again.....Do you work on Tektronix items like a 528 waveform monitor, that may need a CRT and power supply work?Larry
Reply
Dusan Andjelkovic: Hello! I am from Serbia, and I need the board GE Procond Elettronica Type P. 451510051 F: 4290 Type E. 12430392 5 SW Ver. W2C01250 . I was wondering if there is a shop in Serbia, so I can buy it from here, and if you don 't have a shop there, is there any chance of ordering it from my country, by the post or some other way. Thanks, Dusan
Reply
Mike Fu: Dear Madam Sir,Can you repair the old Parvex servo driver? The Model number is SD CC 200 20 40, Nr# 19.964This driver is over 20years old, and installed and used for driving spindle for Prosys Bobbin winder.If your company doesn 't do such a service, could you please let me know which company does such a service?Thank you,Regards,Mike FuElectrical EngineerSiemens VDO Automotive Inc.700 Park. Ave. EastChatham, OntarioCanada, N7M 5M7Phone: 1-519-436-3684Email: mike.fu@siemens.com
Reply
Hans Blauw: Can you give me the specs or technical documentation of a old Parvex motor EC 11 T. Code ED R0501 06 80is there any replacement ???Best RegardsHans Blauw Technical engineerwww.tevel.nl
Reply
SALVADOR DUARTE CERVANTES: Can you give me the specs or technical information of a VOAC hidraulic motor.Part. No. 3707325Type:ser.N.2000150747F11-150-HF-SH-S000
Reply
Geo Suchora: I am a business customer contacting you regarding my Procond Elettronica 356033305 circuit board. The unit seems to be malfunctioning as it is unable to power on or function properly. There are no visible signs of damage or any other external issues that may have caused this problem. I suspect there may be an internal component failure that is preventing the board from operating correctly.I would like to inquire about your repair services for this specific circuit board model. Could you provide an estimate for the replacement cost if the board cannot be repaired? I would appreciate any details regarding the repair process, turnaround time, and warranty options available. Thank you for your assistance in resolving this issue
Reply
Fanie Oberholzer: Polatech linear encoder Type. 115 EMC, Scanning unit ID No.026 976 and ID No.021 402 repair instuctions.
Reply
mr clop: prix et delais merci
Reply
Paolo Favaretto: Dear Mr Mrs.I am an italian dealer of used graphic machinesI have to install photoelectric guarding on a polar 76 em.Have you any model for this type of guillotina?If yes, can you send me photo and prices?Kind regardsPaolo FavarettoEDITARS s.r.l.Graphic MachinesVia delle Macchine, 13 230038 SPINEA (VENICE) ITALYtel. +39 0415411370fax +39 0410991179cell. +39 3331486541info@editars.itwww.editars.it
Reply
Jacek Lewandowski: cutter Polar 92 EMC can 't see the dimension. I am calling for help.
Reply
Mr clop: Prix et delais
Reply
fredy narvae: Hi i need a quote ofEncoderTyp emcIdent- nr. O21 402Fabr- Nr 57 17911. KSame this
Reply
Mr Clop: linear 92 polar
Reply
Oscar Ocampo Paredes: Please i need info about some criteria to inspect the polatech 155 EMC include an offer for a new one.thanks for your quick help in advance!!!!Oscar Ocampo
Reply
Mr Clop: nous n 'avons pas de nouvelle de notre lineair que vous avez reçus le 23 novembre merci de nous tenir informé URGENT merci
Reply
flaviu iederan: Dear SirThe device works but not properly. Sometimes (!!!) they have positioning errors + - up to 5mm. Maybe the encoder is OK and the problem is from wires or controller. Unfortunately the guillotine has not electrical drawings. The encoder has to be for the absolute position measuring, not incremental. Can you help me with some information?Rail: Typ 155EMC Id Nb 022490 Fab Nb 58-25420Slider: Typ Id Nb 022257 Fab Nb 58-26925YoursFlaviu Iederan+40-722-379162
Reply
ctm cartotecniche meridionali: schermo per polar 115 Typ polar eb; ident n 022 331; fabr n 61 3007 richiesta preventivo
Reply
David Sandoval B.: Hola buenas tardes, tengo problemas con el encoder de la maquina marca POLAR MOHR modelo 115SDP mn 5931402 y el encoder es Marca.- POLATECH Typ.- EMC Ident-Nr.- 022-257 Fabr.-Nr.- 59 30544 no se si ustedes me puedan cotizar el encoder. Estoy a sus ordenes para cualquier pregunta o duda.David Sandoval B.MaintenanceXpedx JuarezMovil +52 (656) 135-2618Office +52 (656) 170-5444Fax +52 (656) 170-5433
Reply
Don Marleau: We are in need of 2 MonitorsPolatech Polar eb I 'd #022 331 Fab # 60 2438
Reply
M.Ali ANUK: Dear Sir or Madam; We are looking for the following used Machines Polar 115 EMC Polar 115 EMC 2Polar 115 EM Ali ANUKBest Regards
Reply
muhanad: i need a new polatech part for polar emc 115 cutting machien and i wounder if u can help me to get it
Reply
Alfred Cauchi: Dera Sir or Madam,Could you please send me a quotation CIF Malta for the following.Polatech linear encoderType: A41 89Ident-Nr: 022 480Fabr-Nr.: 59 29931Kind regardsAlfred CauchiJADE Graphic Ltd
Reply
PAUL JEAN STRAEBLER: do you have on stock one modul 026-976what price and what delay for delivery in France ?thanks for your quick answer
Reply
ABDOU HELAL: Dear sir We have 115EMC polar cutter machine and its measurments not correct SO ,we want to test encoder and if it has problem ,we change itplease send me How test our encoder or datasheet,and send our the prise of the one encoderthanks,....................eng. abdou helal
Reply
Manager Sigita Turcinskaite: Hi, we are joint-stock company 'Siauliai book bindery-printing house '. We would like to consult about the breakdown of POLATECH EMC machine. We have a trouble, because the rule 's glass of the machine Polar 55 EM scratched. The glass is covered in something. Also the glass POLITECH EMC of ladar faces scretched. So, maybe you could give us more information about this problem? What we have to do? Or maybe you know who could help us? Machine 's serial number: 022 257; FABR-NR: 60 38511Waiting for your answer.Best regards,Manager Sigita TurcinskaiteE-mail. manager@dailu.ltMobile +370 618 56 300
Reply
Denis Beaudoin: Hi , i have a Polatech Typ 55 EMident-Nr. 021 396Fabr.-Nr. 57 21852The Glass was Broke , can you help us on That Please ?Thanks.
Reply
Michael Ariño: Dear Sir MadamCould you offer a lineal encoder reference 022 480 for POLAR 76 looking forward your replyBest regardsM. Ariño
Reply
Omarouyoub Yassine: Need for english version of servoregulator PMD 230-BL04 4Q 2 technical documentation
Reply
Datexpro AB (Sture Damm): We have a Perma-drive DC drive and for repair we need the electrical drawing of the prinded circuits bosrd.PMD 220 - 15 PIK No: 27228Circuid board: PMD 1Q - U1
Reply
René Lacoste: I have a drive perma drive 22D 15 pik, but not the wirring plant i need the 0-10 volts and stop and start wirring and i have some use drive for sale,René
Reply
vikas singh: dear sir, we have spare drive of PERMA DRIVE ,6350 BAD-NAUHEIM, PMD 220-15 PIK and we dont have manual to make control connection plz send it as soon as possible via mail. vikas singh Raymond Ltd. INDIA
Reply
Andre Jonkman: dear sir,we have a drive of PERMA DRIVE ,PMD 61231 BAD-NAUHEIM, PIK -U1 5 and we dont have the manual to make control connection plz send it as soon as possible via mail.
Reply
TEKIN: Hi,I have not drive manuel. Could you send me drive manuel?
Reply
José: Dear sir,we have spare drive of PERMA-DRIVE PMD 220-15 PIK and we don 't have manual to make control connection. Can you please send it as soon as possible via mail?Thank you.
Reply
FERNANDO SORIANO LOPEZ: Dear sir,we have a lot of drive of PERMA-DRIVE PMD 220-15 PIK and we don't have manual to make control connection. we only need the connection diagram of the drive to connect it, surely it is very simple and that you do not harm them if you provide it to us.Best regards.
Reply
FERNANDO SORIANO LOPEZ: DEAR SIRS.THANK YOU FOR THE INFORMATION ABOUT THE DRIVE PMD 220 - 15 PIK PERMA - DRIVE, WHAT I REALLY NEED IS THE SCHEMATIC DIAGRAM OF HOW TO ADJUST THE DIFFERENT POTENTIOMETERS THAT THE DRIVE HAS, SO I ASK THEM OF THE WAY MORE ATTENDED ME PLEASE SEND THEM.BEST REGARDS
Reply
Juan Carlos Martinez: Buen día requiere el manual de perma-driver modelo: PMD 220-15 PIK. salidos
Reply
Tsvetan Chukanov: I have a drive perma drive 22D 15 pik, but not the wirring plant i need the 0-10 volts and stop and start wirring and i have some use drive for sale,
Reply
juan: Manual Perma Drive PMD 220 orManual Perma Drive PMD 230 BL08 4Q
Reply
Armindo carneiro: I need electronic scheme of converters AC DC type PMD 220-15PIK, (PMD 10-U1)(PMD 10-U0)
Reply
KOZLOWSKI: Bonjour, nous aurions besion de documentation pour le réglage d 'un variateur de tension PERMA-DRIVE Type PMD 220-06 PFK. Merci d 'avance
Reply
Peter: Please could you send me manual of Perma drivePMD - 230 - BL4 4Thanks.Peter
Reply
mehdi: hi deari need to have this perma drive english manual and what is this drive repaired?tanx
Reply
SHAFIQ: Hi Dear ineed user manual PMD 380-25 PFK
Reply
Anatoliy: Hello, I need service manul for PMD 230-BL 04 4 QThank you
Reply
Carl: Please could you e-mail me an English Version of the Perma Drive Manual for a PMD 230-BL04 4Q 2Many Thanks
Reply
tarek: dc drive manual
Reply
JEERASAK: Dear Sir; I have machine which use Perma Drive PMD 230-BL04 4Q so we do not have the manual of it. Can you send me the manual, etc? Thank you very much for your kindness.Best regard;Jeerasak K.
Reply
EdiElectric : Hello ples info : PMD 230-BL04 4Q 2and Perma-drive interbus-s
Reply
MAICHEL: WE WANT TO HAVE YOUR ENGLISH MANUAL FOR PMD 220 - 15 PFK
Reply
robert: I 'm looking for the wiring diagrams for this old drive. Thanks
Reply
Jan Carlos Palacio Ocampo: DEAR sR:i AM LOOKING for electrical Drawing and technical informtion of Perma Drive : PMD1Q-U1thanks a lots
Reply
Sture Damm: We have one Perma Drive Inverter Typ: PMD 200 23015 PIKT 5-NF.We need the electrical drawing and the documentation.
Reply
vladimir.sturma: Dear company.Need for english version of servoregulator PMD 230-BL04 4Q 2 technical documentation + we need buy or repair option card Interbus -S , from company Perma Drive.This card is working with regulator PMD 230 -BL04 4Q 2.Best regards...
Reply
Dieter Kreutz: Hello,we are looking for the manual or technical information about the connection and the varying attitudes.Our converter didn't work and the replacement vonverter is not correkt adjusted.I hope You can help us,best regardsDieter Kreutz
Reply
mark monpas: In a john deere tractor (1010) we put a automotive alternator in place of a generator. How do you wire the alternator if you don 't need the voltage regulator? thank you in advance mark
Reply
Jorge Manuel: Hello We have a BL 7424, ac servo with 1024 imp, and no wiring diagram.Can someone help us?Kind RegardsJorge Manuel
Reply
norizan ramli: The encoder cannot count and the speed cannot control also there is no forward and reverse for our spool unit at our machine. There is no documentation and technical data that we can follow or trial to adjust at the drive. Could you give some indication to us?
Reply
John Maguire.: Panadac PCB Type 853K -001BPanasonic Part # N203p 853K -001
Reply
Dave: Gentlemen:I have a 25 year old Tri-Tronics elrctronic dog training collar that does not work properly.The factory no longer services this unit and their contract repair service is unable to fix it to last more than their 90- day warrenty. This inut origibally cost $550 and every "wear " part (the switches) has been replaced. I think current ni-cads are junk but don 't really know.Obviously no heat problem 6-12 V .I would like to consider making new single layer boards (China?) but would need schematic for same.Will you take a look at it and give me a quotation?Thanks.DaveP.S. Tried to phone...bad no connection.
Reply
Tom Goh: Hi Sir,If you can service and repair Panadac 550 controller, please reply me as soon as you can. I currently have a few units awaiting for service.Thank you.
Reply
reyner: hi, i want to change the program of the panadac 783-900 but I don 't have information about this(manual,source code,etc)Can you share please information
Reply
EDUARDO: Need to driver therm printer PANADAC 931-02THANKS
Reply
Paul Drudge: would a diagram of terminal location for multi voltage be available?
Reply
Carlos Garcia: I need extimative cost of repair Pixelink PL A642. The sistem optic run correct. But IE1394 dnt respond. Need know max price of repair for it camera. If you sale electronic module (not optical) say me the price more shipping cost to Argentina)contactme for mail o msn
Reply
Joe Walser: Is there such a thing as a replacement panel for a Phasatron that is an arbitrary scale from 0 to 1.0 in incriments of .1? I can send you a photo of one. I have many phastrons, but I need them to have this arbitrary scale - they are for a movie prop, and don 't have to actually work.Thanks!P.S. If there is such a thing, I 'll need many of them.Joe Walser
Reply
Mark Butala: I am wondering if you repair the above unit.Thanks
Reply
A. W. Smith Consulting: WE have parts, and can repair Polysonics flowmeters. Fast turnaround. E-mail awsmithconsulting@sbcglobal.net
Reply
JULIO FERMIN: Dear Technical support,we have a big problem with a special unit made for you company,we have a ACS (AUTOMATIC CONTROL SYSTEM) FOR A AURELIA OMSCA PAPER PRESSES MACHINE,this unit have the next information in the plate : POLETTI & OSTA ELECTTROMECANICA ELETTRONICA CASALE MONF (ITALY) APPARECHIATURA TIPO ACS 700.61 MATRICOLA 1550 ANNO 1985 INGRESSO 230V 2 FASE 60HZ.The problem we have is the monitor have not any video signal shown,we have made some test in the monitor and we are thinking in a problem in a electronic board inside the console,we need your request above this problem because is really urgent for us to fix this equipment,the monitor in the top of the console is a TESAK MODEL VD-1001,thanks a lot.My email:ferminjulio@hotmail.com
Reply
JULIO FERMIN: Dear Technical support,we have a big problem with a special unit made for you company,we have a ACS (AUTOMATIC CONTROL SYSTEM) FOR A AURELIA OMSCA PAPER PRESSES MACHINE,this unit have the next information in the plate : POLETTI & OSTA ELECTTROMECANICA ELETTRONICA CASALE MONF (ITALY) APPARECHIATURA TIPO ACS 700.61 MATRICOLA 1550 ANNO 1985 INGRESSO 230V 2 FASE 60HZ.The problem we have is the monitor have not any video signal shown,we have made some test in the monitor and we are thinking in a problem in a electronic board inside the console,we need your request above this problem because is really urgent for us to fix this equipment,the monitor in the top of the console is a TESAK MODEL VD-1001,thanks a lot.
Reply
T.G.I.-Tecnologie Grafiche Industriali: Dear Sirs,We are an italian dealer of second hand offset presses and our firm has bought the inventory of spare parts from AURELIA, including also electronic spare parts.We have also available mechaniocal and electronic technicians.In case of need please contact us at: ricambi@tgionline.it.Best regardsFranco TommasiT.G.I.-Milan-Italy
Reply
Silviu Wolf: You have electronic technicians.From Aurelia H640 number serial;73042and ACS 1570I have mensage to ACS; "ACS NON E INSTALLATO "URGENT
Reply
TECNOLOGIE GRAFICHE INDUSTRIALI: Dear Sirs,We take the pleasure in informing you that we could supply you with original spare parts for your Aurelia 700 2 Serial No.70061, this because our firm has bought the complete inventory of Aurelia spare parts.We could also supply a complete kit to replace the old model Video VD1001, that is no more in production since many years.In case of need please contact us at: ricambi@tgionline.itBest regardsFranco TommasiT.G.I.-Milan-ItalyTel.+390331569004 Fax +390331566107
Reply
Miotto: Dear sirs,we have a Poletti e Osta DC Motor Type 14611 n.100108 E8max V=125 V n=2500 RPM maxwe need 8 brush holder (portaspazzole) for it .Awaiting for avability and pricebest regardsMiotto SrlMarine and Industrial TechnologiesVia della Meccanica n.8Malcontenta - VENEZIA - ITALYTel.0039 041 5470764Fax.0039 041 5470057
Reply
Muhammad Ali: Dear We have the DC DRIVE MOTOVARITOR MODEL: 63 TYPE: 27 - 482 INPUT: 380V 50 -60 HZ OUT PUT: 440V 50A FAST: 3 SERIAL NO. 179 POLETTI & OSTA S.P.A CONVERTITORE STATICO CA CC.Could you pleae provide us speed loop module for this drive?
Reply
carlos ramirez: solicito un esquema electrico del motovariator static ca cc modelo 123 rtipo 27-467serial 373380 v 440 50 60hz
Reply
Hector Garzon Henao: se solicita me faciliten esquema electrico de un motovaritore modelo 123R tipo 27467 serial 373 3805060Hz salida 440
Reply
Shehbaaz Ahmed: Dear We have the DC DRIVE MOTOVARITORMODEL: 63 TYPE: 27 - 482INPUT: 380V 50 -60 HZOUT PUT: 440V 75APOLETTI & OSTA S.P.A
Reply
Silviu Wolf: Dear Technical support,we have a big problem with a special unit made for you company,we have a ACS (AUTOMATIC CONTROL SYSTEM) FOR A AURELIA OMSCA PAPER PRESSES MACHINE,this unit have the next information in the plate : POLETTI & OSTA ELECTTROMECANICA ELETTRONICA CASALE MONF (ITALY) APPARECHIATURA TIPO ACS 700.61 MATRICOLA 1570 ANNO 1983 INGRESSO 230V 2 FASE 60HZ.The problem we have is the monitor have menssage ACS NON E ' INSTALLATO,we need your request above this problem because is really urgent for us to fix this equipment. SILVIU WOLF - MAXGRAPH Solucoes Graficas Ltda. maxgraph@maxgraph.com.br
Reply
Silviu Wolf: I have 2 OMSCA AURELIA, 1 H440, 1 H640 and 1 704 EliteNumber the machine its, 71232, 73042 and 73037, Esqema need of these electric machines, so you can detect what is not working, and 73,042 on the machine when I access the program accessible, it 's me the message that the program is not installed, I think I need the softwer to reinstall it . I need your help because we are importers and sell enough AURELIA in Brazil
Reply
Silviu Wolf: Instruction opereter manual for Automatic Control System A C S 3 for AURELIA 700 4 EliteIm nedet URGENT
Reply
ManuelEi: Great internet site! It looks really expert! Keep up the helpful work!
Reply
Marco Garcia: What are the replacement for DZ1 and DZ4 on the MC-70 board. I am looking for a p n for DZ1 and DZ4. This will fixed my Mc-70I figure out DZ4 to be a zener diode 24V, 25mA, 1.5W and got a replacement zener diode 24V, 50mA, 5W but I do not know about DZ1. I need info on DZ1 zener diode voltage, and current.
Reply
mark: DZ4 A and B are both the same which turn out to be 12 volt 5 watt. for an upgrade you can only go so high on the voltage and from what NTE says 13 volts keeps the diodes cool enough. Also if you solder them in, don 't push them to the board. Let them sit up some to allow total venting around the diode. I never replaced DZ1, but DZ4 A and B were toast when I initially tested them.
Reply
mark: Marco,I had a long conversation with a few people and here is what we have come up with for the MC-70 Board.Now depending on the versionDZ4- is the 24V,50ma,5watt zener ORDZ4A and DZ4B- are 12V,650ma,5watts each in series.DZ1- is 15V, 0.2a,1wattDZ2- is a 3.9V, 20ma, 1 2wattI have replaced them as required and as needed and have made money in the mean time repairing them locally.Good Luck
Reply
johnny: where to buy these diodes?Thanks,
Reply
jimig: What is the cathode of DZ4 connected to via PWB traces top and bottom?Due to the heat from DZ4 's overstress is looks like if there was a trace to DZ1- it vaporized.Are the cathodes of DZ1 and DZ4 connected?
Reply
hackle berry fin: please!!can you help me fix my raphaie sw-x7i don 't know the value of dz1 and r3(zener diode and resistor)thanks!!
Reply
james: I replaced DZ1 and DZ4 for my Reebok ACD2 per Mark 's comment, and it works fine now. Great thanks to Mark 's info. -james
Reply
Mike Stalzer: Have the same problem. Proform treadmill. DZ4 burned out.Have been trying to get what the DZ4 diode was. Hope you got it right and Thanks for the info
Reply
Ron Hopkins: What did you find the value of DZ1 to be?What about the value of R57, the long round tube resister that gets over heated.
Reply
Peter Hancock: Hi,Please quote your repair, exchange or refurbished unit prices for Procond Elettronica controller PN 141877 used in a Proform 830 treadmill.Thanks,Peter
Reply
Patrick MacGregor: I have a Pelco DX1004-060 DVR with a bad power supply board (CMP-03-04). Can do you repair this item? If so, what (roughly) costto repair (or replace, if possible)?Thank you,Patrick
Reply
Ken Colby: Powers up but no back light. Completly black. If I place a beam of light to the monitor, I can see the images.What is the estimated cost for repair of OEM (4CCFL) back lightKen
Reply
mike wilson: need t con board for this monitor
Reply
Adolfo Figeac: I called your telephone and is allways buzy. I download your repair service form but I can not type in my computer the information you request.Our church has a Verdin Carillon by Verdin and the power supply is dead. Is a +12, -!2 and =5 volts. Is made by Condor D.C. Power Suppleis INC.part # 02-31180-0001 rev G. Please advice.Thanks
Reply
Channing Ashbaugh: I would like to talk to someone that works for Maas-Rowe Carillons because I have some questions about Maas-Rowe Carillons. If you can help me please e-mail me atCHANNING28105@LYCOS.COMCHANNING28270@GMAIL.COMCHANCHAN79@KITTYMAIL.COMChanning
Reply
clarence silvers: Hi, i 've got an old c18h3 or g18h3 pavid generator, its hard to tell if its a 'c ' or a 'g ' from the dataplate. It had been working really well untill we went to fire it up to test it before the last ice storm when we noticed that the output was really fluctuating, now it doesn 't have any output. I was wondering if you had any electrical prints or advice on things to check out on the unit. Thanks Clarence
Reply
Tom Robertson: Dear Sirs,I have a Pavid unit on top of the Sullair genset.Model No.: 248275-001Serial No.: 6184I need some information on the functions of the controller board.Does the controller board regulate the RPM of the engine electronically. or does the unit need a solenoid or mechanical govenor.The unit is a 1995 Sullair Genset.Model No.: J75BOM No.: 6716Serial No.: 098G2167 FHOKW - 75Hz - 60Voltage - 277 480Also, if you have information about where I can get operation and maintenance manuels, I would appreciate it.Thanks in advance,Tom
Reply
Cesar Diaz: Hi i 've got an old pavid brush less Model # G15 H3 Serial # 4290 Kw 187-15 Volts 139WDC it had been working good now it doesn 't have any outp ut 120 V and 480 V I was wondering if you had any electrical prints or adavice on tings to check out the Unit thanks Cesar
Reply
Ruth Turner: Where can my husband get information about the above referenced generator?Thank you.Ruth Turner
Reply
Eric Tibbits: I have been having problems adjusting the maximum speed potentiometer for my treadmill. I am not an electrical guy. Could you send me a drawing showing the location of this part so I can fix my treadmill. Thanks
Reply
laurence hamilton: I need a value for R57 &wattage rating on the above mc-70 pcb.
Reply
Jim Cox: Did you find the value for this power resistor? I 'm still looking.
Reply
sanjay: R57 resistance value is 1k ohms wire wound around 5watts. presently i am looking for the value of R68. can you help?sanjay
Reply
Rajni: How can I get circuit diagram with block for this circuit board?There are two large fuse type resistors or right hand side of board, what are they? Looks like they are burned. What are the reasons for this overheated ?
Reply
fraz ahmad: Hihow are you, hope you are doing very well. i have this part at home, the problem is this some z are burned-out. . ..and i cant figure what the exact , voltages and watts of these ZsDZ2,DZ3, DZ4 and D10i have rough guess abt these parts, like DZ2 and Dz3 = 24V 1 wattplease reply. . . . and tell me if i need this complete part MC 70 Part #124438. . . . how much it will cost me. thanks
Reply
fraz ahmad: please i have this part MC 70 Part #124438. . . .. please some can tell me the exact values of these locations DZ3 or DZ1, DZ2,DZ4,D10,D11. . . . . please reply. . then i could repair my Treadmill . . .
Reply
MALIK RIAZ: I HAVE MC-70 MOTOR CONTROLLER CARD, PLEAS I WANT TO KNOW SOME PARTS VALUES OF THESE LOCATION ,R57,DZ1,DZ4 ITS BURNED WITH OVER VOLTS
Reply
Enrique Arturo Macias Acevedo: Me gustaria tener el diagrama electrico de su tarjeta con numero de parte 124438. Es posible conseguirla?
Reply
Tim Dong: I am in need of the schematic for MC-70 AW.Rev -, Motor Control, P N: 124438. Apprearantly, Zener diode, DZ1 and diode D10 were damaged. Does anyone know where I can get it? Thank you very much.Best Regards,Tim Dong
Reply
angel: do you need the part #? dz1 is a zener 15v dz4a and b id zener 12v the d10 is a regular recti 1n4148
Reply
Anthony Woods: I have a Pavid Model G 20 H3. The Crank Timer Board is getting a start signal from the ATS but it is not sending the signal to start the Engine. The unit will start manualy. Is their anything you could suggest. Thank you
Reply
Harry: I need an oil pressure switch for a PAVI Generator MOD: G20H3. Yhis is a normally closed switch that starts the engine then cuts the starter off after proving oil pressure.White Diesel EngineMOD: D200S N: TH3432857SPEC:X99
Reply
Tom Mitchell: Hello, I am a business customer seeking repair service for my Procond Elettronica MC-70 124438 treadmill board. The unit is exhibiting an issue where it fails to power on despite being connected to a power source. I have attempted to reset the unit multiple times without success. Based on initial diagnostics, it seems that the board may need to be replaced. The estimated replacement cost for the Procond Elettronica MC-70 124438 treadmill board is approximately $200 to $300, not including labor charges. If you could provide me with guidance on finding a suitable replacement board or offer repair services, it would be greatly appreciated. Thank you for your assistance.
Reply
Juanita Stuchel: Hi. My TNT160 Bass amp is broke and in need of repair. What is happining is it is clipping. The clip light is on and I get a loud pop noise from the speaker when I turn the amp on and off. Have you run into this problem before? Can I bring the amp to your shop for repair. Are you open on Saturday. Is it possable to wait for repair? About how much would it cost to repair. I won 't hold you to the cost factor, as I know there are variables to everything. THANKS Johnny.
Reply
Gavin Metterda: I have 50,000 Panasonic RA-6600 's that need new power supplies. My budget is 250 machine for repairs. Is this something you do?Gavin MetterdaPanasonic Resale and Delivery
Reply
Gavin Metterda: I never receive reply. Maybe you send me repair manuals for free? Do you charge postage? This would save my company lots of money!
Reply
Becky: I have a unit here that I need to get fixed. It 's a 751233 2A can you do this and what would a repair price be?
Reply
Joe Fanella: Hello,I 'm a technician at Navistar Inc. in Melrose Park, Il. We use Peaktronics DMC-101 motor controllers to control air dampers for our engine testing facility. We 've always had a problem where the air damper is commanded by us, to open to 100%. The correct 4-20ma signal is sent to the controller and the damper moves to 100%, but won 't return to the other direction, when commanded to do so. We verify the command current at the Peaktronics board, but both open and closed LED 's stay on and the damper freezes. We try adjusting the board according to specs without luck, and finally replace the DC-101 and this temporarity fixes the problem, but a month later, the same thing happens. When we measure the MOTOR 1 and MOTOR 2 wires at the DC-101, we get 24volts on both of them. This can 't be right because, the motor is being commanded in both directions then. Do you folks have any thoughts on why we might be going through so many boards? Could we be wiring the unit wrong? Thank you.
Reply
Mary Cochran: Hello, I would like to know if you could repair and calibrate our31 Mhz Synthesized Functioin Generator Mfg: ProteckModel: 9302 I have the Industrial electronics repair form, Let me know if i should just send it in for the quote to be repaired & cal 'd. or let me know if you do not service this item. Thank you. Mary
Reply
Bryan Perry: I have a Powcon 200sm with wire feeder. The drive board went bad in the wire feeder, so I replaced it. Now I do not have fire on the mig gun the inch and purge switch do work and when you pull the trigger it does feed wire and the gas solenoid also accuates. There is 28 volts at the connector in the back of the power supply I believe on pins 1 and 2. I tried to jumper pins 3 and 4 but could not hear the contactor. Upon opening the power supply and visually looking at the PCB board it appears to have been hot. Would you please email the procedure for troubleshooting the contactor set through the pin connector on the power supply. Thank You
Reply
Ray Clauss: is ther a parts list for a powcon board #107029 ? I need to replace CE2.
Reply
Ray Clauss: is ther a parts list for a powcon board #107029 ? I need to replace CE2.
Reply
samara naserallah: I need a schematic daigram for this system in order to spare the presence of an unknown number or electronic kind, a production company woywod(plastic controller- control board pc 95 oem)
Reply
al suckow: Is there any way to test these units? I have several. how long does it take? Also I am looking for new sensors for these the pakstat part # is 01724601-001. Do you sell these or know of a vendor? Thanksal suckow
Reply
Wendy: This unit has a white face and says "Co-Stat " on the front with a knob to turn right for hotter, left for cooler.It is installed to control floor heating in our entryway. Temp control knob is always left in the same position, however suddenly it began heating this floor at maximum temp. Turning the knob did not reduce temp so we disconnected the unit.Assuming the control knob has become faulty, can this be repaired, or if not where can we buy a replacement unit?Thanks.
Reply
JOSEPH A. FOSTER: Can I get service on a Burroughs Protechraft Model T?
Reply
jack dowling: i would like a manuel
Reply
jack dowling: i would like a manuel
Reply
Marino Octaviano Velastegui Gavilanes: Nosotros queremos reparar una máquina soldadora POWCON 200 SM.Necesitamos los siguientes repuestos.Cant # de denominación01 PC BOARD ASSY 105019 REV01 BUS 300v GMQ 3.2 1004 U.K. 919000-3 900202 900000-001ADEMÁS NECESITAMOS UN DIAGRAMA DE CIRCUITOS ELECTRICOS, que tenemos dificultades con su instalacíon.fUENTE DE PODER SERIE # 2M102302
Reply
Tim Murphy: Have not used welder in 30 years worked great thenI tried to use it and it would not weldthe wire feed works okthe only think different I do not have I don 't have the co2bottle attached question is there a switch connected to the co2 that is keeping it from weldingCould use a little hekpThanksTIM
Reply
dan: Looking for a powcon 200 sm manual please!Thank you,Dan
Reply
brad schmidt: need information on repairing control panels
Reply
Don Willis: Looking for replacement switch for prescolite dimmer series 7-12 control panel. The switch has two different numbers on it. Under the faceplate is #200815-01. On the back of the switch is TB # 10-1409-01. The system is working fine, just need to purchase new A B switch for wall mount. Buttons have broke off. Thank you for support on locating new switch.Best regards,Don Willis
Reply
David Barany: I have a Power Ten DC supply, model number "I63C-60100 ". I get voltage, but no meaningful current. It 's like the current limit is turned to minimum. Also, the LCD current display does not function.Can I get a budgetary quote to repair based on this info?Thanks!
Reply
Kristen Ames: To Whom it May Concern: I am current looking for a repair facility that has the capabilities to repair Pacific Scientific PN# SC752A001-01 Model# SC750 Servo . I came across the company 's website and I have a couple of questions about the company 's background of repairing these drives. 1. How long has the company been repairing Pacific Scientific?2. Do you have manuals, documentation on all models for Pacific Scientific?3. Can these drives be load tested?4. Do you have the software to repair these drives?5. Do the technicians have a QC Procedure?6. What is your standard turnaround for repairing these?7. What is your turnaround on expediting?8. Do you offer exchange programs?9. Do you offer pricing for new?10. What is your warranty period?11. Are there any fees for evaluation?12. Do you require an RMA to send unit in for eval repair.13. Could you also supply me a repair price for the PN# SC752A001-01? A quick response will be greatly appreciated!! Thanks, Kristen AmesEMA of NY
Reply
larry: need info for wiring digrams on gen and controll boxthanks
Reply
larry: need any manuals for this gen thx
Reply
Mark Hedden: Hi,I need the same thing. Ihave a 1976 Pavid 35KW 12 wire and I just need to know how to arrange for 240 volt 3 phase. The factory plate says it 's wired for 139 volt? Sounds wrong, but it 's the factory plate. Really simple 4 post configuration inside and all the wires are there, but I can 't figure it out without the diagram. Post me back a diagram if you have one to mark.777corp@gmail.comThanksMark
Reply
James Epp: Hope someone can help me here. I have a pavid generator head, no engine with no id tags. Is there a way to figure out the kw of this unit?I do know this much, It 's between 35-90 kw, had a hercules diesel, ( most likly a d3000 or d3400). It is of the design that uses an adapter spacer to join it to the engine. the fan is inside this section. attaches to a #3 flywheel housing. any help would be appreciated. You can email direct at epp@olypen.com. thanks
Reply
Andy Phillips: I need an estimate on testing repairing the logic board on this machine.Thanks,Andy
Reply
Belyakov Nikita: Dear Sirs, we need to buy electric schemes for Polar 115E 2003, can you help us.Best regards,Belyakov Nikita
Reply
Mr. M.R. THIAGARAJAN: Dear Sir,I need error code data sheet for polar 92EM (without monitor) urgentely. My machine shows error code 80. expecing your reply as soon as possibe.
Reply
prosper Amedume: Unit in need of repair Powcon BD103025 industrial unit with a circuit board issue. It's not powering on despite all connections being secure. Looking for expert assistance ASAP.
Reply
Wojtek (VOYTEK) Hajduk: Hi,Please quote for motor driver 105-641001 repair.Thank you,Voytek
Reply
debbie mullins: I need to get replacement timer pins. Not sure where to purchase this item.
Reply
Al Hammersmark: Did you ever get the pins? If so from where? Thanks
Reply
C E S Electric Attn: Randy Urick: I am presently involved with a church that has a Prescolite model #HD12 dimming enclosure. This system has 12 dimming modules, 120 volt, 20 amp Prescolite control #101074-01B. The circuit breakers in the cabinet are a Square D QO double bolt-on. They are one pole 20 's. The system is wired 120 volt 208 volt 3 phase; 25,200 watts 70 amp max. I have to make adjustments on this unit, but because of the age, I am not able to find the manual. I was hoping that you had printed literature on adjusting and maintaining this unit. I would also like to know if it is expandable beyond the 12 existing zones. I would also like to know if parts are available for this unit or if the dimming modules can be re-built by your company. I am also in need of some of the circuit breakers for this unit. If you could take some time and give me a call or email me back, I would very much appreciate it. The church has updated the lighting with new Prescolite incandescent light fixtures, and is requesting a readjustment of the zones. I would appreciate your help. Please call or email back. Thank you,Randy - CES Electric
Reply
Stephen D. Grimes: I was the Field Service Coordinator for Prescolite Controls from 1990 to 1995. I dont have any documention on the systems, but I was the 1-800-dimmers guy for five years. If you can provide me with panel and control type I can answer alot of your questions.Stephen Grimes804-796-9051
Reply
Jeff Thumser: We have a prescolite scene 4-12 control panel. We have lost a lot of the ability to control the lights. I have fluorescence in the center up light fluorescent cans perimeter and can Center. We want to convert all fluorescent to LED but also I have lost control of my left side cans or long the perimeter unless there fully on. We have 5 of these panels in the conference center, what's my best way of replacing or repairing
Reply
Eddie: looking for trippers for a-309-00amf paragon timer
Reply
Matthew Ritter: The Pipemans Installation Solution DSPS-10012V power supply unit is not providing any output voltage. Urgently looking for a repair service to diagnose and fix the issue to minimize downtime.
Reply
sergio: problem with when on the pc monitor a message that says auto adjust and is not removed
Reply
Kara Willis: Hello, do you have any information on where I could get Pavid radiator hoses?
Reply
ROBERTO H DAGNINO: I need information about a Pavid generator I need parts for this generator,all the information you got on this
Reply
Duane Miller: We have a Model # 248125, Serial # 1618 s ng 4023. I need info on this generator, such as natural to lp conversion kit, excitation componennts, manual, and where to get parts for it.Thanks
Reply
Richard Wood: Hi , I need to know if someone can help me with a Pavid 22KW generator
Reply
keith smith: A book or parts for a 13k pavid generator.
Reply
Tim wood: Would be interested in wiring diagram for a pavid genset. Model j18gaw-f. Serial 2378. Thanks
Reply
Wendy Minchow: I needs filter numbers, oil quantity, coolant quantity, and battery size for a Pavid 65kW model 248269 SN 4599 - this is the only information that is available to me. If you have this information please email me at the email address given above. Any help would be greatly appreciated.
Reply
regis godin: the cable is brokenit is possible to obtain the pinout forlinear encoder polatechtyp: smdident-nr: 026976fabr-nr: 4b91-043139machine:polar mohrmod 92emser: 6211341please rush..
Reply
Sanjay Pradhan: Polatech EMCIdent. Nr. 022 257Number in the center panel is stuck to one disit. It does not show any reading after punching the new measurement and the back guard moves to the end position and bips. I tried to reset the machine by turning off while the back guard is moving but now the display shows no reading.Please advise what to do and how much does it cost to repair.
Reply
Sohel rana: Dear,Sanjay pradhan,My machine ,reset position is 0000.00 .But i don t know what is oooo.oo .Please give me about this advise.If i get about this advise then i will be happy. THANKS
Reply
Krongsak: Polatech EMCIdent. Nr. 022 257Number in the center panel is stuck to one disit. It does not show any reading after punching the new measurement and the back guard moves to the end position and bips. I tried to reset the machine by turning off while the back guard is moving but now the display shows no reading.Please advise what to do and how much does it cost to repair.
Reply
Alfred Cauchi (JADE Graphic Services): Dear sir or Madam,Could you please send me a quotation CIF Malta for the following linear encoder.The following were taken from the defective one.Main bodyPolatech ( Made in Switzerland)76 EMCIdent.Nr.: 021 397Fabrication Nr.: 55 13111Encoder slider bodyPolatech ( Made in Switzerland)EMCIdent.Nr.: 014 852Fabrication Nr.: 55 11464Wishing you and all your family the very best for the festive Holidays.Kind RegardsAlfred Cauchi
Reply
Stefan: The cable is missing and I need to built up a new one.Is it possible to obtain the pinout forlinear encoder polatechtyp: smdident-nr: 026 976fabr-nr: 4399-055297Thanks in advance
Reply
Laurence Beasely: I have three 26DL Plus units all working fine except they won 't take a charge to the battery pack. The contacts for the battery pack were loose so i resoldered them but no difference. This seems like it 's a common problem so I was hoping you know the probable fix and you can give me a price to fix them.
Reply
Tony: Hi:I need a new pack of rechargeable batteries for a 26DL panametrics..How much will cost with shipping cost to Mexico...(first class priority)ThanksTony
Reply
Tom: My upper screen is dim and need it replaced or repaired. Do I need to send the unit or can I buy the part.
Reply
Tom: My upper screen is dim and need it replaced or repaired. Do I need to send the unit or can I buy the part.
Reply
D weerman: Good afternoon.We have one of this units broken and we like to know if you have this type of unit spare or if you have a replacement for this unit without changing the 11 pins foundation?Please let us know soon as possible.Regards D weerman
Reply
Dave Goldstein: Hello,I have some (Maybe up to a dozen or more) P&G faders from our Ward Beck consoles we are using that need to be repaired. It 's mostly worn delrin bearings and swipers. Some may have a dead spot on the resistive track that the swipers have worn away.Is this something you can handle? What do you charge. I will need a turn around time of as quickly as possible.I can give you specific models and S N if ti is something you can do.Dave GoldsteinChief EngineerWBZ-AM, CBS Radio Boston
Reply
Francois Zuccheri: Need Perma drive schematics for PMD 3X400-BL15 4Qor repair performed on unit with high assurance of success.
Reply
Duane: Looking for the cost to repair a Perma-Drive with p n PMD3X400BL154Q.
Reply
Roman Kosakowski: Please send me technical documentation for PMD 3x400-BL15 4QRegardsRoman Kosakowski
Reply
rene roosemna: goodmorning i m looking for electrcal schedule for th perma drive card ic 29 s if you have one please mail the schedule thanks in advance best regardsrene rooseman
Reply
J.C.\'s TV & Video Service: ident -NR 022331; fabr-nr 60 1306. This is a monitor for a paper cutting machine used by the University of Oklahoma. Unit is in a "dead set " condition. It appears to be 1989 vintage. Date code on the FBT appears to be 49th week of 1989. Repairable? or is there a replacement model to be had? Ideas?
Reply
George Hatch: Have an elderly lady with a 3 wheel scooter made by Invacare that stopped working. At the drive unit I have Y - faded ground, O - ground all the time, W - ground varies with lever movement, L - B+ with ign key on, Black - ground, Brown - nothing, Gray - nothing, Black - B+, and R - B+. I suspect the Penny and Giles solo type D50033 1 (40080098) order code C2-PG60A2 (4G32B8002745) drive unit is defective but can find no troubleshooting data. If the info I gave you is enough to diagnois and the unit is bad please let me know how much for another one. Thanks in advance, George
Reply
expofeCex: Hello everyone First of all sorry that I write in this topic but I have some technical problem with the use of this forum. When I 'm trying to enter in the appropriate topic, I received a 404 error It 's about the only topic in which I was able to enter. Do you have the same problems? What 's going on?
Reply
William Cherrington: I 'm looking for a company that can get a diagnostics and repairs on the reference controller if necessary. The controller is on a Invacare Panther MX-4, Model No. SC4-89T-CW. The unit has very little time on it but after being left in storage for approximately one year and the batteries completely discharging over the time the unit will no longer operate and we suspect a problem with the controller.Please advise first that you are able to service these units and if so what would be your diagnostic and repair costs.Regards,William Cherrington916-792-7555
Reply
Stefan Linz: hello, I have a defective control unit D50035 2 can fix me?about an answer I would be happy!greetings Stefan Linz
Reply
Stefan Linz: Can you fix Penny & GILES controller D50035 2 A2 - 110 ?
Reply
Bob king: Get a price testing control box for panther lx4 scooter thanks bob .phone is 304-788-3102 . Cell- 304-790-1334
Reply
Pete Snidal: I have a Fortress Scooter with a P 'n 'G SOLO controller, with the wiring severely interfered with. Controller has 4 hi-current (ie, #10) wires on one end, and a pair of multi-pin connectors on the other end. One connector has 4 terminals, the other has 10. Controller is mounted in a separate case, with a loom containing Red and Black hi-current wires and a 18 Ga. green wire in it. Also two connectors, one 6-pin, and one 9-pin. My problem is where to connect these conectors and loom on the scooter system. ie, which to motor, to throttle control, from battery pack, etc. Colours from P+G unit to in side of connectors are clear and easily distinguishable. What I need is a wiring diagram, or pin-out from the SOLO to the outside world of the scooter itself. Any help appreciated.ps
Reply
max r. williams: DO YOU REPAIR PANALARM CARDS AND POWER SUPPLIES THAT ARE DATED BACK TO THE 80 'S AND 90 'S WE HAVE APPROXIMATELY 50 UNITS DATING BACK TO THE EARLY 80 'S
Reply
Angela Baca: GE Part Model Number: AC7-00712-21056GE Serial Number: C7-008820Issue: NO DISPLAY OUTPUT FROM PERITEK BOARDCan you please let me know what the repair charge is and rma number so I can send in the board for repair?
Reply
Kenneth Tucker: I have a KEW 150zv-66 #2010715. It does not have enough pressure at the nozzle. It is getting enough water.
Reply
Roberto H Dagnino: I been trying to contact you people a several times,Ineed urgently information about a Pavid generatorModel:J35DWH-DSerial No.:5882 2060Pavid Manufacturing -Co.-Inc.
Reply
Roberto Dagnino: I need information about a Pavid SulliarModel:J35DWH-DHours: Reads 940.4Running Condition:Engine runs ok,generator does not work.Engine:White 4cyl diesel,Serial #VL3441144 D230 X308Measurments:5 '9 "Wide,9 ' 6 " Long, 6 ' Tall. I appreciate your soon response.Thank you.
Reply
Roger: I just purchased a pavid backup generator. is there parts or service available anywhere for my pavid?
Reply
kian: Dear sir or madamWe are a service company that work on heidelberg,polar and stahl machine. most of cutting machine in iran are polar and thay need repair job on measurement system such SDP,EM,EMC models.we are interested to work with your company.then could you please send us price list especislly for spare part of linear encoder.the most important part for replacing are linear gasket and scaner head.sincerely yours,kian
Reply
Leonard Cahill: My 76 Em cuts from 2.5 to 10" exactly. When it hits 11" it is 1 16th short from there on . Is it the encoder? TAM settings do NOT fix this problem. We now suspect an encoding issue. Thank you Len CahillVisual Printing
Reply
Jeremie Lieb: We have a 100Kw induction unit that will not load up. Do you offer field service?
Reply
shahzad: b35 waiting for EC
Reply
andrew levine: We have two thermocouples that need repair rewiring. is this something that you can do?
Reply
Dan Regan: looking for repairs on this unit. any details, turn around time? cost? etc., Any info you can give me thanks
Reply
Zdaras: hi, i need user manual for perma drive PMD220-25PIK. Send it to my email please. Thanks
Reply
João Lourenço: Dear SirWe need a PMD220-25PIK Manual to made calibratrions in drives. If possible we need it asap because we have some differences in machine.You can send it to this email account.Best RegardsJoão Lourenço
Reply
anilkumar: polarmhor all cutting m c knifes sizes &draings i want please
Reply
LAKSHMIPATHI GANGATHARAN: I am a business customer seeking repair service for my Power One NRG350-4003 DC Power Supply. The unit is no longer functioning properly, as it fails to power on when plugged in. I have tried multiple power outlets and cables but have been unsuccessful in getting the unit to turn on. Additionally, there are no visible signs of physical damage to the power supply. Given the critical role this power supply plays in our operations, we are interested in obtaining repair services
Reply
daniel: to whom it may concern,we are looking to repair a the following pc boards for a polar 76 em serial54611911. hk card 0163312. kdi card 019161 prog. version 2can anybody help us repair these boards or have tech. info on them.on the kdi board the eprom may be defect.regards daniel
Reply
Oswaldo Ojeda : I necedad to repair the the SK board for aPolar EM monitor. Please give opción to do it. Thank you
Reply
Oswaldo Ojeda : I necedad to repair the the SK board for aPolar EM monitor. Please give opción to do it. Thank you
Reply
Jason Eklund: I have a sous vide professional that has a cracked lcd screen. I need to know how much you would charge to repair it.
Reply
Patrick séguy: Bonjour,je suis à la recherche d 'un condensateur réf : 411122430sh 0,047µF(X2)+0,68Mhome2X0,025µF(Y2)+2X1mH250 V 50 60Hz -10A 40°cHMF 25 100 21CEn avez-vous en stock?CordialementPatrick
Reply
patrick: This Procond elettronica is bad because no responces!!!
Reply
FRANCOIS: Bonjour,je suis à la recherche d 'un condensateur réf : 411.10.5060GMF 40 100 21sh 0,15µF(X2)+ 2x 0.004µF (Y)2X0,5 mH + 1.5 MQ250 V 50 60Hz -10A 40°c46-94CordialementFrancois
Reply
ron: hello am converting welder from 460 to 230. i located the 3 buss bars. and changed them. i turned on power and power indicator light an fan comes on. but no power to weld with , any info would be great . thanks
Reply
RONALD SEQUEIRA: My Partlow 8211011 isn't displaying any readings or power indicators. Need assistance fixing it.
Reply
Jose Luis Almeida: Dear SirI need a manual for a Drive Poletti&Osta Model 123 RType 27467serial number 1280If You can help me. Best Regard J.Luis
Reply
Nathan Franco: I have a failed Power-One power supply (P N 83712-01; Model: SPAXRTX-03G Rev. 012) recently pulled out of an old Gateway RAID array. Is this something you would look at?
Reply
Bill Kappeler: Do you repair or replace the Sharp LQ screen(LQ10DD021) on Polar137 ED machine. 1995 serial#6541135If so what is the chargeThank YouBillTeamservices BookletBinding
Reply
harry: Touch screen lights up but not responsive.
Reply
GAND Géraldine: : Our industrial unit is experiencing a significant electrical failure. The unit, a large-scale conveyor system used for processing raw materials, has stopped working entirely. We've tried troubleshooting the problem but haven't been able to identify the cause. As this unit is essential for our production line, we need it repaired or replaced as soon as possible. We anticipate an estimated replacement cost between $50,000 and $75,000, depending on the specific components required. We would appreciate a quote outlining potential repair options, including timelines and associated costs, to facilitate our decision-making process.:
Reply
Cal Hunter: We have a Plockmatic unit that was in line with a Savin (B&W approx 60 CPM) copier. We are using it off line as a stand alone hand feed unit. We have the service manual. It is 8 to 10 years old.Do yo do service on these machines?Would it be reasonable for me to put it in a van and bring it down to you for repair? (6 -7 hours down I 77)
Reply
Betty Maul: We have a Plockmatic BM 2000 with Face Trimmer and square fold finishing.We need an alternative source for a repair technician in the South Jersey Philly area... We never have time in our shop to wait 2 days for a tech.Can you provide a service tech for us please....Thanks
Reply
Jessica Raushi: I have a Perkin Elmer N3150170 power supply that does not power up. I am looking to see if these are still available and if parts are still repairable. Are these a propiertary part?
Reply
Ferguson: Procond MC-70 124438 drive issue unit not functioning properly, suspect motor or drive controller problem. Need immediate repair assistance.
Reply
Steve Block: Our 10-1075-01B dimmer control has failed in our church
Reply
Bruce Lovett: The paper bin tower turns on,red lights flash but display screen will not light up. noticed screen beginning to fade before completely
Reply
Tamadite: Can you please give me the value of component C34 of PCB Procond 3560144029?
Reply
Tamadite: Can you please give me the value of component C34 of PCB Procond 3560144029?
Reply
Tamadite: Can you please give me the value of component C34 of PCB Procond 3560144029?
Reply
Greg: Hellol Need schematic for procond elettronika 3560144029 or information about ferrite transformer (voltage winding or equivalent resistance)thank you
Reply
Niels Sylvest: I have a printcard it is mounted in AEG Electrolux Lavatherm TN95670is it possible to repair, so that machine can be used again, there is no light in the panel at all, and the repair man told me that the failure is in the computer print.please inform me adress for repair of the card in Denmark
Reply
Amy Waggoner: Sure, here are a few steps you can take to troubleshoot the issue with your PEAVEY MM-8802 ULTRASONIC GENERATOR1. Check power source and connections.2. Inspect for any visible damage or loose components.3. Test with a different power outlet or power source.4. Check for error messages or indicator lights.5. If issue persists, consult user manual for more troubleshooting steps or contact manufacturer for support.
Reply
Chansac: BonjourJe recherche le schéma pour une platine Procond électronica 356O1029 montée sur un réfrigérateur Brandt 1153HBien à vous
Reply
Dale Faraone: I am trying to find out what pin each wire is connected to on this unit, as are were pulled apart and not knowing where each one goes causes a huge problem.typ emcident-nr. 022 257fabr.-nr. 59 31221Any help with this would be greatly appreciatedDale
Reply
Muhammad usman: Dear Sir,Please helpot me hoe i repair this controller , its burnt due to 220V ,or please send me its technical data sheet where i can fix it Thanks
Reply
tom mulcahy: i have controller for golf buggythe circuit board is damagedthe following numbers are on the boardAC 040957P74757 1550135can u repair this itemcan u give me an estimate for repair if i send the itemto uthank you tommulcahy
Reply
John Evans: i have a Penny & Giles tech p74757 iss 0135 golf buggy controller that has been damaged is there a chance it can be repaired
Reply
Frank Six: I have a Penny & Giles Tech P74757 iss 0135 from Mini Grosser T130Controller that has been damaged. It is possible tu repaired or did you have a new part.Please send as a information.Many thanks.Frank Six
Reply
Özay Erduru: Hi. I have mini grosser T 130 . I need New controller
Reply
William Teodecki: Tracabout power wheelchair Replacement 100 amp controller cable harness or fix existing 6 pin connector with two sizes of pins, two larger pins are + and - it is the smaller 2 of 4 pins that bent broke. Cannot find replacement penny giles cable. Can you repair two smaller pins in round connector?
Reply
Kathy Martin: Hi Please send me price and approx. lead time to repair PIV GA12-U(Nr. 670001 A2.25v)Thank you,Kathy
Reply
amin moradi: HiI need schematic of this board Procond Elettronica 3560101029thanks
Reply
JUGIE: HiI need schematic of this board Procond Elettronica 3560101029thanks
Reply
Rune Møller Hauser: Print number: 3560101029Is mounted in Brandt refrigeratorNormal function in about 8 years, then it start writiing "e" in display, and start bipping. Then I turn the temperature up and down, and then it have normal function again, maybe in 1 hour, sometimes 14 days I think its a´failure in the print, the frigirator works perfect, also when the display writes "e" and its bippingDo you have "new" repaired prints?With best regardsRune M. Hauser
Reply
Ignasi López: My fridge don't work correctly. Continuesly put a message with E and whistle.The tecnic said me that that isn t a water problem, and he prove the motor and it works good.He said that the problem is is electronic system.I can t find a new electronic base.This base looks good and I m not sure of the problem.Questions:Can I do same prove to confirm the fail.?Which cost have the repartition?The fridge have 9 years and I m not sure If is interesting repair it.Where are you? I have to send the base, who?Thanks
Reply
amin moradi: HI Please attach any schematics, hook-up diagrams, or manuals you may have.
Reply
Arvi Raud: Hi, I need a display on the Fagor refrigerator 07-0992440circuit board barcode180809506006manufacturerProcond Elettronica
Reply
Mike Burford: The circuit board in my Phoenix International BGBA001325 is not powering on despite being plugged in properly. Need immediate repair assistance.
Reply
Quy P Nguyen: Procond 451523906
Reply
Flashpaqmzt: elements (case, binding).
Reply
WILDKATcck: A handwritten book is a book
Reply
Telecasterkds: only a few survived.
Reply
WILDKATpvt: Europe, and in Ancient Russia
Reply
Herberttep: economic crisis in pakistan essay 2020
Reply
Telecasterduv: reproduced by hand, in contrast
Reply
Juicerxnh: Libraries of the Carolingian era). IN
Reply
kellyTag: hello. topic for me thanks kelly
Reply
Visionouv: drafts of literary works
Reply
kellyTag: hello. topic for me thanks kelly
Reply
kellyTag: hello. topic for me thanks kelly
Reply
RainMachinexqn: "Julia's Garland" (fr. Guirlande de Julie)
Reply
KrisstiGreed: Two girls have no place to celebrate the new year, who will invite us? copy link past browser and write me twi.kz K5Wl
Reply
GiBlobado: kwatery augustow www.noclegi-pracownicze-augustow.online stx21
Reply
ThomasFum: An firm intimate property and greatly ready treatment in behalf of Covid would be a significant breakthrough as a remedy for managing the pandemic, but two antivirals recently authorized in the US explore up with some eloquent caveats, including ungentlemanlike gear up and incident single to each those at grey occur seeking imperious indisposition and death. Paxlovid from Pfizer and molnupiravir from Merck and Ridgeback Biotherapeutics were authorized encompassing the US Viands and Opiate Furnishing (FDA) matrix week. The pills could be a game-changer looking representing the most exposed, because they can be bewitched at bailiwick twice a simplify of be uncovered of lifetime as five days to postpone hospitalization and death. In the the shadow of a doubt of those considered at stoned wager pursuing of tyrannical disease, Paxlovid was found to be 89% phenomenal when hypnotized within the pre-eminent three days of symptoms and 88% operative in the at the start five days. Andrew Pekosz, professor of microbiology and immunology at the Johns Hopkins Bloomberg Adherents in of Patrons Salubriousness, described the pills as “extremely promising”. “There is an higher collecting repayment in the direction of these in terms of limiting self-denying infection,” Pekosz said. “It’s proper possessions to be a to over to operative on them effectively.” Those challenges categorize the occasion that supplies of the Pfizer treatment are acutely puny, while the
Reply
Gisenobby: noclegi augustow bon turystyczny noclegi pracownicze augustow w augustowie www.noclegi-pracownicze-augustow.online stx21
Reply
Raymondskype: Gdzie postrzega? celuloidy a seriale online – pochwalane architektury streamingowe Celuloidy plus seriale online ostatnie gwa?tem konsekwentny fragment modnej rekreacje. Kontrahenci nagminnie zabiegaj? najcudowniejszych tezy do przewertowania w odpoczynek, zmrokiem akceptuj w linii. Masowy przekrój grzeczno?ci streamingowych (których ka?dorazowo pomna?a!) nie uwalnia gatunku. Co oferuj? najatrakcyjniejsze serwy spo?ród filmami online? Wyt?umacz si? spo?ród rodzim? list? i postaciami, jakie ho?ubi? darowan? platform? VOD. W poni?szym druku nagromadzili?my najwa?niejsze nowiny o nieskomplikowanych serwisach z obrazami w Internecie. Zdeklarowana mniejszo?? spo?ród nich ??da animacji konta za? wp?at abonamentowych, wszak odkryjesz ?ród nich oferty, jakie ?wiadcz? równie? gratisowe obrazy. Na jakich ustrojstwach ustosunkowana dostrzega? celuloidy online? Nowomodne platformy streamingowe nie obejmuj? obecnie popularno?ci swojskich serwów, albowiem pragnie im na jako najbujniejszej publice. Racjonalnie ka?dorazowa grzeczno?? VOD jest ?ywio?owa przy za?yciu najwi?kszych przegl?darek multimedialnych. Niniejsze spo?ród kolumn wznieca, i? nie piastuje podkre?lania spo?ród jakiego sporz?dzenia ano powa?nie zarabiasz. Obowi?zuj?ce, ?eby stanowi?o one pod??czone do platformy. Prócz bie??cego sieci streamingowe potrafi? i jednostkowe naszywki, jakie przy??czysz nadto ?ask? humanitarnych konsumów spo
Reply
Herbert2Caure: Are you an American who is upon looking notwithstanding exigency loans ? Do you think you clout need to drift compete for a accommodation soon? Are you on tap to drop of engaging normal loans that appear along with a tombola of hassle? Whatever your setting is, we are here to skedaddle! We be undergoing written this careful direct on Bad ascription advance bewitching in 2022 so you can understand all you insistence to distinguish about it. Anterior to we rise into the details of this article, detonate us advertise you that there are varieties of loans offered on online confidence in lending websites. These loans depart in their overall compromise limits, repayment schedules, and terms and conditions, in any patient, some youth credit rules pertain to all of them. For that apology, whether you plan on inviting a payday conformity, hardship allow, debased protection pin, investment proceed, or a hidden financial assistance, this orientate is for you! A- Online Trust Lender in America Valid like every side of our lives in this cosmos of technology, sanction lending websites also deliver on the agenda c frolic a moment of struggle, with different platforms emerging with every partiality day. These platforms do not becoming you the conscientious mazuma change speedily, in place of, they just do as a middleman between you and the lender. They participate in a encyclopedic network of lenders on board, and whenever you submit a credit presence, they hook you with those
Reply
PatrickvoB: An injury that renders a person handicapped and prohibits them from returning to work for a lengthy period of time is known as a long-term disability. Long-term disability lawyers in Brampton can offer you peace of mind and support during this difficult time.
Reply
Jasondow: Republican politicians all over the country have repeated the Great Replacement theory A century-old racist theory reentered the political discourse around immigration and has become commonplace on the campaign trail as Republicans hope to retake control of Congress in November.
Reply
meext: SWWiuxREMgBB4MS6wlttlQTFCSHIyC7SKf79pv1TtrKZMgmiUTMQCxZgSIyG6TLDt3BoAYjgAkvACRirj8ALSaw94G9ujkTFL9T1iqS0GSx25fcW4n62EXi6hobmMJxHaKJxnHMzNQ4BB14MGkP8Qb9isVXJ2HsI
Reply
Daviddoody: A large amount of people looking for a new job are unsure expediting veteran resume services constitutes a solid investment and this is a excellent puzzle, so we ought to first take a look at some of the every-day finishes that Commenced with executives that make the contract and use a on-the-ball registered resume writer company. Let us begin this pow-wow by citing that the site for an employment network labeled Ladders, resounds that mailing a resume perfected by a resume building staff to any present job ad pump up that executive's percentages of getting employed by 50%. As proven, faxing a expertly sculpted resume to virtually all online institutional vacancy listing will increase this applicant's odds of tagging an meeting of the minds by 41percent. Tell it from the mountain top, having a professional resume that is backed by a verified resume writing company ensures a needle -sharp competitive flame to high level applicants and particularly administrative -level employment searchers, therefor inevitably every for-real professional resume artist organization also produces notable and effective LinkedIn profiles in addition to great resumes. Truth is, going through finding a resume that is well -written as well as professionally written is perhaps the most fundamental guidepost of any job hunt, and obtaining an equally solid Social Media presence is assuredly somewhat less vital in the way of finding employment. In short, the statistics don't li
Reply
Holographiccjr: multiplies (see also article
Reply
Pouringjyy: Middle Ages as in Western
Reply
Josephfug: I just want to say thank you for this great forum. I found a solution here on computer-cnc-repair.info for my issue.
Reply
Vitamixxfp: secular brotherhoods of scribes.
Reply
Blenderdwt: Of his works, he is especially famous
Reply
CHIRPpdm: antiquities. These are the Egyptian papyri
Reply
RainMachinezda: (palimpsests). In the XIII-XV centuries in
Reply
Garminzwfm: ancient and medieval Latin,
Reply
Glassuth: At the same time, many antique
Reply
Squierpzr: inventions of typography
Reply
WILDKATmln: manuscripts held onto
Reply
Independentmgc: or their samples written
Reply
pooDug: hallo ich bin POO :P ich wohne in IR. Das ist wohl thema? hmmmm , best regards for all :) POO I need to use eng or can GER?
Reply
Miguel: Hello, I am a business customer in need of repair service for my Pump Boss 990394-10 controller. The unit is not functioning properly as it is failing to power on or respond to any commands. I have checked the power source and ensured there are no loose connections, but the issue persists. I suspect there may be an internal component failure. Based on past repairs of similar controllers, I estimate the replacement cost to be around $200 to $300. I would greatly appreciate assistance in diagnosing and resolving this issue
Reply
julien: I need to replace (or repair) the electeonic card of my dryer Faure. The Start button donnot work any more.Thanks,Michel Julien
Reply
Dave Chopourian: Faulty Phoenix Contact ibsstme24bk-t causing a halt in production line. Unable to identify specific issue. Urgent repair service needed to resolve
Reply
Alenna: Looking for repair service for a Pfening Wat-a-mat KP2-D-1203 controller board. Unit currently not responding to input commands. Need assistance
Reply
Suresh Elumaggad: Dear Sir;I have machine which use Perma Drive PMD 230-BL04 4Q, so we do not have the manual of it. Can you send me the manual, etc?Thank you very much for your kindness.Best regardSuresh
Reply
Scot Campbell: Manuals with control drawings available?
Reply
zane lee: The circuit board in your PMC 81-25461 unit is malfunctioning, causing the unit to fail to power on or display erratic behavior. Given the complexity and high value of the unit, a replacement circuit board is estimated to cost around $200-$300. The repair service would involve diagnosing the specific issue with the board and either repairing it or replacing faulty components.
Reply
JIM PREECE: Hello, thank you for reaching out about your Power Gear 500210 with a Milwaukee Cylinder control. It appears that the unit is experiencing a malfunction where it does not respond to commands or operate properly. The issue is likely related to the control system within the Milwaukee Cylinder. Repairs for this kind of problem typically involve diagnosing and troubleshooting the control unit to identify and fix any faulty components. As for the estimated replacement cost, it can vary depending on the specific part that needs to be replaced and the extent of the repair needed. It would be best to have a professional technician inspect the unit to provide an accurate cost assessment for the repair service.
Reply
catalin: how much would a spare part Procond Elettronica411612438 costs? thanks
Reply
José Moreno: The Procond MC-70 treadmill controller is not responding when powered on. Need assistance ASAP to get the unit back up and running efficiently.
Reply
JMartins: Need assistance with a Precor Inc. 43550-303 treadmill board not powering on. Looking for a skilled technician to diagnose and repair the issue
Reply
Ton Tran: Hello, I understand you are seeking repair service for your Penny & Giles Drive Technology D50033 2 Drive Module. To assist you efficiently, please provide a clear description of the issue you are experiencing with the unit. Include details such as what the Drive Module does or doesn't do when in operation. Additionally, it would be beneficial if you could specify any error codes displayed or any unusual sounds emitted by the unit during operation.Based on the information you provide, our technicians will be able to diagnose the problem accurately and provide you with an estimated replacement cost for the necessary repairs. Thank you for reaching out, and we look forward to assisting you in resolving the issues with your Penny & Giles Drive Technology D50033 2 Drive Module efficiently.
Reply
Tom : seeking repair service for my Procond Elettronica MC-70
Reply