Welcome to Pro

unofficial service & repair forum

We repair a wide range of Pro Equipment.

Ask questions, or call 1-336-969-0110 for faster service.

Use the search bar above to find specific manufacturers.

Why to send us your work?

• 40+ years of experience repairing Industrial & Commercial units
• Certified Senior Industrial Electronics Technician
• Ability to do Reverse Engineering
• No job to big or small
• Fast turn around time on most units
• Quality of work comes before profit!
• Old Fashion Customer Service is always the right policy
• Extended warranty
• Fair Estimates
• Low Prices

To receive more information about your unit then fill out the email form below
and we will be in contact with you within 24 hours.

Post Your Problem

🛠️ Common AI Repair Summaries 🏭

Comments for Pro

92 comments found.

📝 Tom R said:

I have a PWM Motor Controller card from a Proform treadmill that seems to be not working. Please email me. Thanks

➡️ Reply Procond Elettronica

        

📝 EDDY MEDINA said:

I have an MC-70 motor controller that is not working from a Reebok ACD2 treadmill and I would like to know how do I get this part repair or replace. Please call me at your earliest convenience at (1917)662-2892 or email me asap. Thanks EDDY MEDINA

➡️ Reply Procond Elettronica

                

📝 J. Haag said:

I have an ICON MC-70 motor controller for an IMAGE 10.8q treadmill (IMTL 19372), serial #K23693147 that requires repair as the controller is not functioning correctly. I believe the ICON part number for this controller is #152004. Do you fix these motor controllers?If so, what is the price range for the repair work?Lastly, who manufactures these controllers. I am sure it is not ICON.

➡️ Reply Procond Elettronica

                

📝 hamed said:

Dear Sir, Mam,I have a treadmill icon health & fitness and it is damaged so I open the cover and see the board with this model MC-70 Aw.revPart #124438 damaged .I have a qouestion:Two parts of this board are damaged and I cant read the part number on them.so please let me know the parts number(dz1 and dz4) or send me electrical drawingthanks and best regardshamed

➡️ Reply Procond Elettronica

        

📝 Xhuneyt said:

I have a problem with a motor controler for waching machines, and i wanted you to help me about this. It has not enough force to roll the clothes. I changewd the chip, but it is still not working properly. The code: 3 560 332 06

➡️ Reply Procond Elettronica

        

📝 Jeff Haag said:

I believe my MC-70 controller board may be bad. Do you repair these boards? Is this board manufactured by Procond Elettronica?Thanks.

➡️ Reply Procond Elettronica

                

📝 lou broder said:

i am getting error message 21. any clue on what is wrong?

➡️ Reply Procond Elettronica

                

📝 John Kennedy said:

My 10.6QI just stopped-no warning. When I start it it it makes a mild thumping sound- The display works ok. I want to fix it

➡️ Reply Procond Elettronica

        

📝 PAUL MITCHELL said:

HI THERE COULD YOU TELL ME THE PRICE FOR A NEW PART FOR A PROCOND ELETTRONICA PART NO 411122430 OUT OF A ZANNUSI WASHING MACHINE.MANY REGARDS PAUL.

➡️ Reply Procond Elettronica

                

📝 roger moutal said:

Hi,COULD YOU TELL ME THE PRICE FOR A NEW PART FOR A PROCOND ELETTRONICA PART NO 451511735 . AND ALSO THE PRICE FOR A TRANSPORTATION TO FRANCE.THANK YOU

➡️ Reply Procond Elettronica

                        

📝 Gianfranco Manunta said:

Hi,COULD YOU TELL ME THE PRICE FOR A NEW PART FOR A PROCOND ELETTRONICA PART NO 356071101 - LABEL NO 452650111 - FOR Ariston dishwasher LSI 66 A. AND ALSO THE PRICE FOR A TRANSPORTATION TO ITALY.With regards, GIANFRANCO MANUNTA, via M. Macchi 87 - 20124 Milano - ItalyTHANK YOU

➡️ Reply Procond Elettronica

                                

📝 Velazquez said:

I have some problems with my dishwasher Ariston LSI 66A, it seems the elettronic control does not work 45650110.Its possible to buy it on line? How does it cost?

➡️ Reply Procond Elettronica

                                

📝 DOENLEN said:

BONJOUR,COULD YOU TELL ME THE PRICE FOR A NEW PART FOR A PROCOND ELETTRONICA PART NO 356066303-FOR SIEMENS REFRIGERATOR REF KI24L451FF/01?BEST REGARDSGUY DOENLEN

➡️ Reply Procond Elettronica

                                        

📝 DIEHL said:

Hello,Could you tell me the price for the Procond Elettronica Part no 3560061009 ( V16 ) for a refrigerator Vedette RC306.I only need the electronical cartBest RegardsMr DIEHL

➡️ Reply Procond Elettronica

                                                

📝 SCHROETTER said:

Hello,Could you tell me the price for the Procond Elettronica Part no 3560066303 for a congelator SIEMENS .I only need the electronical cart .I am also ready to do a standard exchange if possible . Best RegardsMr SCHROETTER

➡️ Reply Procond Elettronica

                                        

📝 tamgho kevin said:

jai besoin de savoir combien coute cette carte

➡️ Reply Procond Elettronica

                                

📝 Orukwo Amaechi said:

Please get me quote urgently for a Procond Ellectronica capacitor/switch of 0.25 micro farad with part no 411135901 for dish washing machine. We need it to replace the faulty one on our dish washing machine with the following specification:ELX Model: LS9PPN: 9CGX50502215EL: AC 400 V3 N AC 230V/3/50HZSER NO. 64500023POWER: 10.2 KWIPX4YEAR 2006

➡️ Reply Procond Elettronica

                        

📝 Andrew Walford said:

Hi can you gve me a price for the above, cheers

➡️ Reply Procond Elettronica

                

📝 brunner gerhard said:

please tell me for what application ist this part used?thank you

➡️ Reply Procond Elettronica

                

📝 danno said:

Hi,Do you have a line filter made by Procond Elettronica # 411.10.5040this is in a Varian Turbo V 550 pump controller.

➡️ Reply Procond Elettronica

                

📝 Duncan Macaskill said:

Hello can u give me a price for part number 411122430 Procond Elettronica this is out fo a Bendix Washing machine

➡️ Reply Procond Elettronica

                

📝 kevin said:

DEAR SIRS,COULD YOU TELL ME THE PRICE FOR A PROCOND ELETTRONICA PART NO. 411624430.MANY REGARDS KEVIN

➡️ Reply Procond Elettronica

                

📝 salvatore rassu said:

Hi,Got a zanussi jet system 1400 xc and i am looking for the electronic board 45151005112430381/5If you have this part ? How much with the shipping to the uk?Looking to speak to you.RegardsSalvatore

➡️ Reply Procond Elettronica

        

📝 Sergio Dratwa said:

Elevation motor is working properly, drive motor does not starts.There are 2 diods that are burn: DZ1 and DZ4 (in between the relay and what look like to be 2 ceramic resistors). There is an overheat area on PCB under these diods, but PCB still OK.Would you sell me just the diods?If not, how should I proceed?Thank you,Sergio - Ace Fitness Repair Inc

➡️ Reply Procond Elettronica

        

📝 henry gutierrez said:

MORNINGYOUR HAVE PARTS ELETRONIC OF TRADMILL AND BICYCLE UNIVERSAL MUCH MODELS FOR REPAIRTHANK YOUSINCERELYHENRY L.R. GUTIERREZ

➡️ Reply Procond Elettronica

                

📝 John McGeady said:

think we need a new transformer, which has procond eletrrronica written on itcan you assist ?

➡️ Reply Procond Elettronica

                

📝 ronnie byrne said:

hi i am looking for card for zanussi zwn 1220w washing mc procond ecettronica type procond 451516703type assembly 132191513type e board 124307062sw vwr uda30202t70 wk 48/08

➡️ Reply Procond Elettronica

        

📝 A. Redd said:

Proform 725si (PFTL 72560) board ID 170-0518 rev. 2.Do you have replacement board (new or refurb.)? What is the cost to repair?

➡️ Reply Procond Elettronica

                

📝 gerardo aldape salas said:

i need repair a module 170-0518 rev.2 im live in mexico

➡️ Reply Procond Elettronica

        

📝 Ged McDaid said:

My treadmill seems to wish to go max speed regardless I have tested the potentiometer it is ok/Can you repair the mc-76?Can you supply to the uk?Cheersged

➡️ Reply Procond Elettronica

        

📝 Charles Ray said:

I have a sears treadmill with mc-70 motor controller #124438 that has shorted diodes. I would like to have a price on repairs or replacement.Thanks Charles

➡️ Reply Procond Elettronica

📝 Joseph Krug said:

I received the MC-70 motor controller board back today. It works perfectly, and I wish to thank you for your one-day turn around time and quick return shipping. Your service is better than you advertise, which is unusual and greatly appreciated.Thank You again!!!A very satisfied customer!!

➡️ Reply Procond Elettronica

        

📝 kenneth Anderson said:

I would like to thank the people and Industrial Electronic Repair for repairing a mc-70 motor control boad. I was working on an elderly couples treadmill and found the control board defective, when I contacted Industrial I explained how they were elderly and didnt have a lot of money. Industrial offered to fix it for free and even paid return shipping. I have installed the new part and the people are real happy with their treadmill. Thanks Kenny

➡️ Reply Procond Elettronica

                

📝 Sebastian Voss said:

Hello,I have a refrigerator and inside ist a plateType Procond 452747163 sw NGBF0A1L242523719 ERF2000P-01.D 220/240V 50Hz - ERF2000PBon this plate is the part, which ist marked with T1 (a transformator)broken.Can you sell it to me, and what is the price.ThanksSebastian Voss

➡️ Reply Procond Elettronica

        

📝 Sonny Ta said:

I need to find out what is the repair or replacement cost for this part , part # 124438, and the turn around time if I send it in. What is the best way to send in the part for repair ?orIf I decide to buy the part, how much would it cost ? Include shipping and Handling .Thanks.Sonny

➡️ Reply Procond Elettronica

                

📝 Keith Haufler said:

I am having trouble with my powertread nordictrack treadmill PT 6.0 and have traced power into the controller. I checked the DC motor by hooking it up to a drill battery and it works fine. What part usually fails on these things? If I need to a replacement, what will it cost? Is it cheaper to send you this part and let you repair it? I noted the DZ1 and DZ4 parts were discolored and replaced them but without any luck. The problem may be in the logic chip. What is the best way to send in the part for repair ?orIf I decide to buy the part, how much would it cost ? Include shipping and handling. Thanks, Keith

➡️ Reply Procond Elettronica

                        

📝 Kevin C McCurrie said:

Hi, I had the code E21 and had a repair service check all of the components. They concluded that the console had to be replaced and it isnt made anymore. I found one seller for $499.00 and it is too much. Its a shame because it was a good treadmill.

➡️ Reply Procond Elettronica

                                

📝 Tim Cumings said:

I have an error code e21 on my treadmill. I found that the speed sensor wire was broken off the screw on the motor attachment. Do you have one and how much is the cost. Thanks

➡️ Reply Procond Elettronica

                

📝 jivat said:

The treadmill IMAGE 10.6Q has the KEY missing.Can you please provide us the Key or recommendwhere I will be able to get it.Thanks

➡️ Reply Procond Elettronica

                

📝 roberto arreola said:

Iwant to now the price in this part

➡️ Reply Procond Elettronica

                        

📝 Andy Bren said:

I am an electronics tech and I am attempting to repair this MC-70 controller board. Do you have schematics on .pdf you could email me? I would sure appreciate it.Also I noticed you are hiring. Perhaps I could do some work for you on the West coast. I tried calling the number but I only got a busy tone multiple times. If you are interested please contact me at andy.bren@astronics.comThank you.Andy Bren

➡️ Reply Procond Elettronica

                

📝 james bryan said:

we need to t know the replacement cost for this item.Brand:gepruft#vc50er 9pi2004-22-lch3105

➡️ Reply Procond Elettronica

                

📝 Dan Baldauf said:

I have a treadmill that when turned on starts slowly for about 1 minute and then shuts down. it displays an Er2 error message. Any thoughts on what is wrong the cost it might be to fix it.????Dan

➡️ Reply Procond Elettronica

                

📝 freddy said:

Tengo problema con mi treadmill. aparece en la pantalla E2 lo que no permite que funcione mi treamill. Que debo hacer, por favcor ayudenme.gracias. espero su respuesta

➡️ Reply Procond Elettronica

                

📝 Howard Karloff said:

I have two broken Proform MC60 motor controllers. How much wouldit cost to fix them?

➡️ Reply Procond Elettronica

        

📝 Duanna Jorgensen said:

I have an AMF 7 day Paragon Timer. It controls my motor on my septic system. The problem is that it seems to run continuous, and I have no book to explain to me how to set the timer. Is there a way to find a manual that will explain this to me? I bought the house, and the system was already in. I have not been able to find anyone that seems to know anything about this.ThanksDuanna

➡️ Reply Procond Elettronica

        

📝 freddy said:

Tengo un treadmill Image 10.6Q, aparece en la pantalla E2. y no funciona mi treadmill. que debo hacer. por favor ayudenme. gracias

➡️ Reply Procond Elettronica

📝 Fred Santizo said:

Dear Sir/Madam:I need a device with tree switches. It must create the PWM to control the speed of a treadmill motor controller. One of the switch will turn on/off the treadmill the other two will be use to increase/decrease the speed of the motor or the treadmill. I want to eliminate the console of a treadmill that uses an mc70 motor control. The MC70 comes with a power supply of 12vdc and 5vdc that can be use for the PWM to control the motor controller. Please email me with any question and more detailed info. Thanks for the time that you will put into this matter.Fred Santizo

➡️ Reply Procond Elettronica

        

📝 Marco Garcia said:

I need schematics for the MC-70 for Proform 985 CD treamill. Where can I get a copy?

➡️ Reply Procond Elettronica

                

📝 Nestor Juguera said:

need schematics for the 356069403 for even microwave delonghy mw605/3. Where can I get a copy?

➡️ Reply Procond Elettronica

                        

📝 János Madarasz said:

Wellcome!I would like to know conecting up of 356069403 microwave.How can you help me ?Sincerelly Janos Madarasz

➡️ Reply Procond Elettronica

                                

📝 Moti said:

Wellcom! I have a burnt component ty1. I need the component no of this part.

➡️ Reply Procond Elettronica

                                

📝 C Westerhof said:

manual ge procond 356092103

➡️ Reply Procond Elettronica

                

📝 Jørgen Toft-Petersen said:

HI ThereI need a schematic over the above PCB. It is siiting in a Atlas NFS242 frezer

➡️ Reply Procond Elettronica

                        

📝 Knud Oellgaard said:

HiWhere can I get a new electronic thermostat print to my Atlas NFS242

➡️ Reply Procond Elettronica

📝 Lloyd Anderson said:

Howdy! I was hoping to find out whether my procond board made to you folks through the mail and if so what the turnaround time might be. thanks, Lloyd

➡️ Reply Procond Elettronica

        

📝 marcus thomas said:

What are the type and specs for the Diodes on this Controller board? They are located in the DZ1 and DZ4 positions. Also, is the resistor that is located ajacent to these Diodes the best size? if not what do you recommend?

➡️ Reply Procond Elettronica

                

📝 Andrew said:

Depending on the version you have....DZ2 = 3.9V 1/2Watt (replace with higher wattage)DZ1 = 15V 1 watt (replace with 5 watt)DZ4 = 24V 5 watt-OR-New versions haveDZ4A and DZ4B = 12v 5 watt eachResistor is 1K, I replaced it with a 10Watt wire wound 5%.

➡️ Reply Procond Elettronica

                        

📝 Bobby said:

Replaced the diodes like all others. Replaced the big resistors as well. Still not working. Getting 130v out from the motor +/- but the motor isnt turning. There is a lot of corrosion near this board, as if the previous owner spilled something and maybe shorted out the board. Is there supposed to be a resistor in R17 near the heatsink at the opposite end of the input power resistors. Also, is JP2 supposed to be jumpered like JP1 is? My jumper had been severed at some point. Thanks

➡️ Reply Procond Elettronica

                                

📝 Jim Cox said:

There is no resistor in R17 and JP1 and JP2 should be jumpered. What value do you have for R57?

➡️ Reply Procond Elettronica

        

📝 Larry Nadler said:

Got the board back and it works great! Amazing turn around time....you got in on a Friday and I had it back the next Wednesday....Unheard of especially with a check in the box for payment! Did you change anything else besides those 2 Zener diodes to heavier duty components? Thanks again.....Do you work on Tektronix items like a 528 waveform monitor, that may need a CRT and power supply work?Larry

➡️ Reply Procond Elettronica

        

📝 Dusan Andjelkovic said:

Hello! I am from Serbia, and I need the board GE Procond Elettronica Type P. 451510051 F: 4290 Type E. 12430392/5 SW Ver. W2C01250 . I was wondering if there is a shop in Serbia, so I can buy it from here, and if you dont have a shop there, is there any chance of ordering it from my country, by the post or some other way. Thanks, Dusan

➡️ Reply Procond Elettronica

📝 Geo Suchora said:

I am a business customer contacting you regarding my Procond Elettronica 356033305 circuit board. The unit seems to be malfunctioning as it is unable to power on or function properly. There are no visible signs of damage or any other external issues that may have caused this problem. I suspect there may be an internal component failure that is preventing the board from operating correctly.I would like to inquire about your repair services for this specific circuit board model. Could you provide an estimate for the replacement cost if the board cannot be repaired? I would appreciate any details regarding the repair process, turnaround time, and warranty options available. Thank you for your assistance in resolving this issue

➡️ Reply Procond Elettronica

📝 Marco Garcia said:

What are the replacement for DZ1 and DZ4 on the MC-70 board. I am looking for a p/n for DZ1 and DZ4. This will fixed my Mc-70I figure out DZ4 to be a zener diode 24V, 25mA, 1.5W and got a replacement zener diode 24V, 50mA, 5W but I do not know about DZ1. I need info on DZ1 zener diode voltage, and current.

➡️ Reply Procond Elettronica

        

📝 mark said:

DZ4 A and B are both the same which turn out to be 12 volt 5 watt. for an upgrade you can only go so high on the voltage and from what NTE says 13 volts keeps the diodes cool enough. Also if you solder them in, dont push them to the board. Let them sit up some to allow total venting around the diode. I never replaced DZ1, but DZ4 A and B were toast when I initially tested them.

➡️ Reply Procond Elettronica

        

📝 mark said:

Marco,I had a long conversation with a few people and here is what we have come up with for the MC-70 Board.Now depending on the versionDZ4- is the 24V,50ma,5watt zener ORDZ4A and DZ4B- are 12V,650ma,5watts each in series.DZ1- is 15V, 0.2a,1wattDZ2- is a 3.9V, 20ma, 1/2wattI have replaced them as required and as needed and have made money in the mean time repairing them locally.Good Luck

➡️ Reply Procond Elettronica

                

📝 johnny said:

where to buy these diodes?Thanks,

➡️ Reply Procond Elettronica

                        

📝 jimig said:

What is the cathode of DZ4 connected to via PWB traces top and bottom?Due to the heat from DZ4s overstress is looks like if there was a trace to DZ1- it vaporized.Are the cathodes of DZ1 and DZ4 connected?

➡️ Reply Procond Elettronica

                        

📝 hackle berry fin said:

please!!can you help me fix my raphaie sw-x7i dont know the value of dz1 and r3(zener diode and resistor)thanks!!

➡️ Reply Procond Elettronica

                

📝 james said:

I replaced DZ1 and DZ4 for my Reebok ACD2 per Marks comment, and it works fine now. Great thanks to Marks info. -james

➡️ Reply Procond Elettronica

        

📝 Mike Stalzer said:

Have the same problem. Proform treadmill. DZ4 burned out.Have been trying to get what the DZ4 diode was. Hope you got it right and Thanks for the info

➡️ Reply Procond Elettronica

        

📝 Ron Hopkins said:

What did you find the value of DZ1 to be?What about the value of R57, the long round tube resister that gets over heated.

➡️ Reply Procond Elettronica

                

📝 Peter Hancock said:

Hi,Please quote your repair, exchange or refurbished unit prices for Procond Elettronica controller PN 141877 used in a Proform 830 treadmill.Thanks,Peter

➡️ Reply Procond Elettronica

📝 Adolfo Figeac said:

I called your telephone and is allways buzy. I download your repair service form but I can not type in my computer the information you request.Our church has a Verdin Carillon by Verdin and the power supply is dead. Is a +12, -!2 and =5 volts. Is made by Condor D.C. Power Suppleis INC.part # 02-31180-0001 rev G. Please advice.Thanks

➡️ Reply Proteck

        

📝 Channing Ashbaugh said:

I would like to talk to someone that works for Maas-Rowe Carillons because I have some questions about Maas-Rowe Carillons. If you can help me please e-mail me atCHANNING28105@LYCOS.COMCHANNING28270@GMAIL.COMCHANCHAN79@KITTYMAIL.COMChanning

➡️ Reply Proteck

📝 Eric Tibbits said:

I have been having problems adjusting the maximum speed potentiometer for my treadmill. I am not an electrical guy. Could you send me a drawing showing the location of this part so I can fix my treadmill. Thanks

➡️ Reply Procond Elettronica

        

📝 laurence hamilton said:

I need a value for R57 &wattage rating on the above mc-70 pcb.

➡️ Reply Procond Elettronica

                

📝 Jim Cox said:

Did you find the value for this power resistor? Im still looking.

➡️ Reply Procond Elettronica

                        

📝 sanjay said:

R57 resistance value is 1k ohms wire wound around 5watts. presently i am looking for the value of R68. can you help?sanjay

➡️ Reply Procond Elettronica

        

📝 Rajni said:

How can I get circuit diagram with block for this circuit board?There are two large fuse type resistors or right hand side of board, what are they? Looks like they are burned. What are the reasons for this overheated ?

➡️ Reply Procond Elettronica

        

📝 fraz ahmad said:

Hihow are you, hope you are doing very well. i have this part at home, the problem is this some z are burned-out. . ..and i cant figure what the exact , voltages and watts of these ZsDZ2,DZ3, DZ4 and D10i have rough guess abt these parts, like DZ2 and Dz3 = 24V 1 wattplease reply. . . . and tell me / / / if i need this complete part MC 70 Part #124438. . . . how much it will cost me. thanks

➡️ Reply Procond Elettronica

        

📝 fraz ahmad said:

please i have this part MC 70 Part #124438. . . .. please some can tell me the exact values of these locations DZ3 or DZ1, DZ2,DZ4,D10,D11. . . . . please reply. . then i could repair my Treadmill . . .

➡️ Reply Procond Elettronica

                

📝 MALIK RIAZ said:

I HAVE MC-70 MOTOR CONTROLLER CARD, PLEAS I WANT TO KNOW SOME PARTS VALUES OF THESE LOCATION ,R57,DZ1,DZ4 ITS BURNED WITH OVER VOLTS

➡️ Reply Procond Elettronica

        

📝 Enrique Arturo Macias Acevedo said:

Me gustaria tener el diagrama electrico de su tarjeta con numero de parte 124438. Es posible conseguirla?

➡️ Reply Procond Elettronica

        

📝 Tim Dong said:

I am in need of the schematic for MC-70 AW.Rev -, Motor Control, P/N: 124438. Apprearantly, Zener diode, DZ1 and diode D10 were damaged. Does anyone know where I can get it? Thank you very much.Best Regards,Tim Dong

➡️ Reply Procond Elettronica

                

📝 angel said:

do you need the part #? dz1 is a zener 15v dz4a and b id zener 12v the d10 is a regular recti 1n4148

➡️ Reply Procond Elettronica

📝 Tom Mitchell said:

Hello, I am a business customer seeking repair service for my Procond Elettronica MC-70 124438 treadmill board. The unit is exhibiting an issue where it fails to power on despite being connected to a power source. I have attempted to reset the unit multiple times without success. Based on initial diagnostics, it seems that the board may need to be replaced. The estimated replacement cost for the Procond Elettronica MC-70 124438 treadmill board is approximately $200 to $300, not including labor charges. If you could provide me with guidance on finding a suitable replacement board or offer repair services, it would be greatly appreciated. Thank you for your assistance.

➡️ Reply Procond Elettronica

📝 Mary Cochran said:

Hello, I would like to know if you could repair and calibrate our31 Mhz Synthesized Functioin Generator Mfg: ProteckModel: 9302 I have the Industrial electronics repair form, Let me know if i should just send it in for the quote to be repaired & cald. or let me know if you do not service this item. Thank you. Mary

➡️ Reply Proteck

📝 JOSEPH A. FOSTER said:

Can I get service on a Burroughs Protechraft Model T?

➡️ Reply Protech

📝 Patrick séguy said:

Bonjour,je suis a la recherche dun condensateur ref : 411122430sh 0,047µF(X2)+0,68Mhome2X0,025µF(Y2)+2X1mH250 V50/60Hz -10A/40°cHMF 25/100/21CEn avez-vous en stock?CordialementPatrick

➡️ Reply Procond Elettronica

        

📝 patrick said:

This Procond elettronica is bad because no responces!!!

➡️ Reply Procond Elettronica

        

📝 FRANCOIS said:

Bonjour,je suis a la recherche dun condensateur ref : 411.10.5060GMF 40/100/21sh 0,15µF(X2)+ 2x 0.004µF (Y)2X0,5 mH + 1.5 MQ250 V 50/60Hz -10A/40°c46-94CordialementFrancois

➡️ Reply Procond Elettronica

📝 Ferguson said:

Procond MC-70 124438 drive issue unit not functioning properly, suspect motor or drive controller problem. Need immediate repair assistance.

➡️ Reply Procond

📝 Tamadite said:

Can you please give me the value of component C34 of PCB Procond 3560144029?

➡️ Reply Procond Elettronica

📝 Tamadite said:

Can you please give me the value of component C34 of PCB Procond 3560144029?

➡️ Reply Procond Elettronica

📝 Tamadite said:

Can you please give me the value of component C34 of PCB Procond 3560144029?

➡️ Reply Procond Elettronica

        

📝 Greg said:

Hellol Need schematic for procond elettronika 3560144029 or information about ferrite transformer (voltage winding or equivalent resistance)thank you

➡️ Reply Procond Elettronica

        

📝 Niels Sylvest said:

I have a printcard it is mounted in AEG Electrolux Lavatherm TN95670is it possible to repair, so that machine can be used again, there is no light in the panel at all, and the repair man told me that the failure is in the computer/print.please inform me adress for repair of the card in Denmark

➡️ Reply Procond Elettronica

📝 Chansac said:

BonjourJe recherche le schema pour une platine Procond electronica 356O1029 montee sur un refrigerateur Brandt 1153HBien a vous

➡️ Reply Procond Elettronica

📝 Muhammad usman said:

Dear Sir,Please helpot me hoe i repair this controller , its burnt due to 220V ,or please send me its technical data sheet where i can fix it Thanks

➡️ Reply Procond Elettronica

📝 amin moradi said:

HiI need schematic of this board Procond Elettronica 3560101029thanks

➡️ Reply Procond Elettronica

        

📝 JUGIE said:

HiI need schematic of this board Procond Elettronica 3560101029thanks

➡️ Reply Procond Elettronica

        

📝 Rune Møller Hauser said:

Print number: 3560101029Is mounted in Brandt refrigeratorNormal function in about 8 years, then it start writiing e in display, and start bipping. Then I turn the temperature up and down, and then it have normal function again, maybe in 1 hour, sometimes 14 days I think its a´failure in the print, the frigirator works perfect, also when the display writes e and its bippingDo you have new repaired prints?With best regardsRune M. Hauser

➡️ Reply Procond Elettronica

        

📝 Ignasi López said:

My fridge dont work correctly. Continuesly put a message with E and whistle.The tecnic said me that that isn t a water problem, and he prove the motor and it works good.He said that the problem is is electronic system.I can t find a new electronic base.This base looks good and I m not sure of the problem.Questions:Can I do same prove to confirm the fail.?Which cost have the repartition?The fridge have 9 years and I m not sure If is interesting repair it.Where are you? I have to send the base, who?Thanks

➡️ Reply Procond Elettronica

📝 amin moradi said:

HI Please attach any schematics, hook-up diagrams, or manuals you may have.

➡️ Reply Procond Elettronica

        

📝 Arvi Raud said:

Hi, I need a display on the Fagor refrigerator 07-0992440circuit board barcode180809506006manufacturerProcond Elettronica

➡️ Reply Procond Elettronica

📝 Quy P Nguyen said:

Procond 451523906

➡️ Reply Procond Elettronica

        

📝 Flashpaqmzt said:

elements (case, binding).

➡️ Reply Procond Elettronica

        

📝 WILDKATcck said:

A handwritten book is a book

➡️ Reply Procond Elettronica

        

📝 Telecasterkds said:

only a few survived.

➡️ Reply Procond Elettronica

        

📝 WILDKATpvt said:

Europe, and in Ancient Russia

➡️ Reply Procond Elettronica

        

📝 Herberttep said:

economic crisis in pakistan essay 2020

➡️ Reply Procond Elettronica

        

📝 Telecasterduv said:

reproduced by hand, in contrast

➡️ Reply Procond Elettronica

        

📝 Juicerxnh said:

Libraries of the Carolingian era). IN

➡️ Reply Procond Elettronica

        

📝 kellyTag said:

hello. topic for me thanks kelly

➡️ Reply Procond Elettronica

        

📝 Visionouv said:

drafts of literary works

➡️ Reply Procond Elettronica

        

📝 kellyTag said:

hello. topic for me thanks kelly

➡️ Reply Procond Elettronica

        

📝 kellyTag said:

hello. topic for me thanks kelly

➡️ Reply Procond Elettronica

        

📝 RainMachinexqn said:

Julias Garland (fr. Guirlande de Julie)

➡️ Reply Procond Elettronica

        

📝 KrisstiGreed said:

Two girls have no place to celebrate the new year, who will invite us? copy link past browser and write me twi.kz/K5Wl

➡️ Reply Procond Elettronica

                

📝 GiBlobado said:

kwatery augustow www.noclegi-pracownicze-augustow.online stx21

➡️ Reply Procond Elettronica

                

📝 ThomasFum said:

An firm intimate property and greatly ready treatment in behalf of Covid would be a significant breakthrough as a remedy for managing the pandemic, but two antivirals recently authorized in the US explore up with some eloquent caveats, including ungentlemanlike gear up and incident single to each those at grey occur seeking imperious indisposition and death. Paxlovid from Pfizer and molnupiravir from Merck and Ridgeback Biotherapeutics were authorized encompassing the US Viands and Opiate Furnishing (FDA) matrix week. The pills could be a game-changer looking representing the most exposed, because they can be bewitched at bailiwick twice a simplify of be uncovered of lifetime as five days to postpone hospitalization and death. In the the shadow of a doubt of those considered at stoned wager pursuing of tyrannical disease, Paxlovid was found to be 89% phenomenal when hypnotized within the pre-eminent three days of symptoms and 88% operative in the at the start five days. Andrew Pekosz, professor of microbiology and immunology at the Johns Hopkins Bloomberg Adherents in of Patrons Salubriousness, described the pills as extremely promising. There is an higher collecting repayment in the direction of these in terms of limiting self-denying infection, Pekosz said. Its proper possessions to be a to over to operative on them effectively. Those challenges categorize the occasion that supplies of the Pfizer treatment are acutely puny, while the

➡️ Reply Procond Elettronica

                

📝 Gisenobby said:

noclegi augustow bon turystyczny noclegi pracownicze augustow w augustowie www.noclegi-pracownicze-augustow.online stx21

➡️ Reply Procond Elettronica

                

📝 Raymondskype said:

Gdzie postrzega? celuloidy a seriale online – pochwalane architektury streamingowe Celuloidy plus seriale online ostatnie gwa?tem konsekwentny fragment modnej rekreacje. Kontrahenci nagminnie zabiegaj? najcudowniejszych tezy do przewertowania w odpoczynek, zmrokiem akceptuj w linii. Masowy przekroj grzeczno?ci streamingowych (ktorych ka?dorazowo pomna?a!) nie uwalnia gatunku. Co oferuj? najatrakcyjniejsze serwy spo?rod filmami online? Wyt?umacz si? spo?rod rodzim? list? i postaciami, jakie ho?ubi? darowan? platform? VOD. W poni?szym druku nagromadzili?my najwa?niejsze nowiny o nieskomplikowanych serwisach z obrazami w Internecie. Zdeklarowana mniejszo?? spo?rod nich ??da animacji konta za? wp?at abonamentowych, wszak odkryjesz ?rod nich oferty, jakie ?wiadcz? rownie? gratisowe obrazy. Na jakich ustrojstwach ustosunkowana dostrzega? celuloidy online? Nowomodne platformy streamingowe nie obejmuj? obecnie popularno?ci swojskich serwow, albowiem pragnie im na jako najbujniejszej publice. Racjonalnie ka?dorazowa grzeczno?? VOD jest ?ywio?owa przy za?yciu najwi?kszych przegl?darek multimedialnych. Niniejsze spo?rod kolumn wznieca, i? nie piastuje podkre?lania spo?rod jakiego sporz?dzenia ano powa?nie zarabiasz. Obowi?zuj?ce, ?eby stanowi?o one pod??czone do platformy. Procz bie??cego sieci streamingowe potrafi? i jednostkowe naszywki, jakie przy??czysz nadto ?ask? humanitarnych konsumow spo

➡️ Reply Procond Elettronica

                

📝 Herbert2Caure said:

Are you an American who is upon looking notwithstanding exigency loans ? Do you think you clout need to drift compete for a accommodation soon? Are you on tap to drop of engaging normal loans that appear along with a tombola of hassle? Whatever your setting is, we are here to skedaddle! We be undergoing written this careful direct on Bad ascription advance bewitching in 2022 so you can understand all you insistence to distinguish about it. Anterior to we rise into the details of this article, detonate us advertise you that there are varieties of loans offered on online confidence in lending websites. These loans depart in their overall compromise limits, repayment schedules, and terms and conditions, in any patient, some youth credit rules pertain to all of them. For that apology, whether you plan on inviting a payday conformity, hardship allow, debased protection pin, investment proceed, or a hidden financial assistance, this orientate is for you! A- Online Trust Lender in America Valid like every side of our lives in this cosmos of technology, sanction lending websites also deliver on the agenda c frolic a moment of struggle, with different platforms emerging with every partiality day. These platforms do not becoming you the conscientious mazuma change speedily, in place of, they just do as a middleman between you and the lender. They participate in a encyclopedic network of lenders on board, and whenever you submit a credit presence, they hook you with those

➡️ Reply Procond Elettronica

                

📝 PatrickvoB said:

An injury that renders a person handicapped and prohibits them from returning to work for a lengthy period of time is known as a long-term disability. Long-term disability lawyers in Brampton can offer you peace of mind and support during this difficult time.

➡️ Reply Procond Elettronica

                

📝 Jasondow said:

Republican politicians all over the country have repeated the Great Replacement theory A century-old racist theory reentered the political discourse around immigration and has become commonplace on the campaign trail as Republicans hope to retake control of Congress in November.

➡️ Reply Procond Elettronica

                

📝 meext said:

SWWiuxREMgBB4MS6wlttlQTFCSHIyC7SKf79pv1TtrKZMgmiUTMQCxZgSIyG6TLDt3BoAYjgAkvACRirj8ALSaw94G9ujkTFL9T1iqS0GSx25fcW4n62EXi6hobmMJxHaKJxnHMzNQ4BB14MGkP8Qb9isVXJ2HsI

➡️ Reply Procond Elettronica

                

📝 Daviddoody said:

A large amount of people looking for a new job are unsure expediting veteran resume services constitutes a solid investment and this is a excellent puzzle, so we ought to first take a look at some of the every-day finishes that Commenced with executives that make the contract and use a on-the-ball registered resume writer company. Let us begin this pow-wow by citing that the site for an employment network labeled Ladders, resounds that mailing a resume perfected by a resume building staff to any present job ad pump up that executives percentages of getting employed by 50%. As proven, faxing a expertly sculpted resume to virtually all online institutional vacancy listing will increase this applicants odds of tagging an meeting of the minds by 41percent. Tell it from the mountain top, having a professional resume that is backed by a verified resume writing company ensures a needle -sharp competitive flame to high level applicants and particularly administrative -level employment searchers, therefor inevitably every for-real professional resume artist organization also produces notable and effective LinkedIn profiles in addition to great resumes. Truth is, going through finding a resume that is well -written as well as professionally written is perhaps the most fundamental guidepost of any job hunt, and obtaining an equally solid Social Media presence is assuredly somewhat less vital in the way of finding employment. In short, the statistics dont li

➡️ Reply Procond Elettronica

        

📝 Holographiccjr said:

multiplies (see also article

➡️ Reply Procond Elettronica

        

📝 Pouringjyy said:

Middle Ages as in Western

➡️ Reply Procond Elettronica

        

📝 Josephfug said:

I just want to say thank you for this great forum. I found a solution here on computer-cnc-repair.info for my issue.

➡️ Reply Procond Elettronica

        

📝 Vitamixxfp said:

secular brotherhoods of scribes.

➡️ Reply Procond Elettronica

        

📝 Blenderdwt said:

Of his works, he is especially famous

➡️ Reply Procond Elettronica

        

📝 CHIRPpdm said:

antiquities. These are the Egyptian papyri

➡️ Reply Procond Elettronica

        

📝 RainMachinezda said:

(palimpsests). In the XIII-XV centuries in

➡️ Reply Procond Elettronica

        

📝 Garminzwfm said:

ancient and medieval Latin,

➡️ Reply Procond Elettronica

        

📝 Glassuth said:

At the same time, many antique

➡️ Reply Procond Elettronica

        

📝 Squierpzr said:

inventions of typography

➡️ Reply Procond Elettronica

        

📝 WILDKATmln said:

manuscripts held onto

➡️ Reply Procond Elettronica

        

📝 Independentmgc said:

or their samples written

➡️ Reply Procond Elettronica

        

📝 pooDug said:

hallo ich bin POO :P ich wohne in IR. Das ist wohl thema? hmmmm , best regards for all :) POO I need to use eng or can GER?

➡️ Reply Procond Elettronica

📝 julien said:

I need to replace (or repair) the electeonic card of my dryer Faure. The Start button donnot work any more.Thanks,Michel Julien

➡️ Reply Procond Elettronica

📝 catalin said:

how much would a spare part Procond Elettronica411612438 costs? thanks

➡️ Reply Procond Elettronica

📝 José Moreno said:

The Procond MC-70 treadmill controller is not responding when powered on. Need assistance ASAP to get the unit back up and running efficiently.

➡️ Reply Procond

📝 Tom said:

seeking repair service for my Procond Elettronica MC-70

➡️ Reply Procond Elettronica

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.

---