Anilam Service & Repair Forum
Daer Sir,We are working on Anilam Since 4 years. We made many mould on it and machine working quality is good. So that is why we purchase one more Anilam 1100 machine from a old machinery ware house. but machine have no software, can you plz send us Anilam 1100`s software ver1.66. we will be very thank full to you.
—> Purchase or Repair:
Reply🗨️Ask a New Question Below❓
Recent Comments Search: "Anilam"
- Anilam → anilam error code 18 ↗
- Anilam → Anilam MINI WIZARD A163-20000 ↗
- Anilam → touch pad membrane for Anilam Crusader M ↗
- Anilam → Anilam WIZARD 111 A1480111 ↗
- Anilam → Anilam WIZARD 350 A1920001 ↗
- Anilam → Anilam error code 18 ↗
- Anilam → Anilam crusader 2 l ↗
- Anilam → Anilam : +X OR -X LIMIT ANILAM. ↗
- Anilam → Anilam Cursador II ↗
- Anilam → 1100 Software ↗
- Anilam → Anilam 1100 control ↗
- Anilam → Anilam Anilam Crusader II wiring Diagram ↗
- Anilam → cmos memory ↗
- Anilam → Anilam Crusader II 3Axis Z axis problems ↗
- Anilam → Anilam Crusader II Model # A225-102113 ↗
- Anilam → i have also problem +x or -x limit ↗
- Anilam → ANILAM CRUSADER-2 WIRING DIAGRAM ↗
- Anilam → Anilam anilam crusader m ↗
- Anilam → ANILAM CRUSADER-2 ↗
If you need your Anilam unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110
Recent 397 Comments
The unit that controls the XY Axis on the Anilam mini wizard A163-20000 is behaving erratically - it is not functioning as it normally does.
—> Purchase or Repair:
—> Purchase or Repair:
I believe there might be an issue with the display unit on the Anilam Miniwizard A163-2000. It seems like it has stopped functioning properly. I recommend reaching out to a technician for further assistance to address this problem.
—> Purchase or Repair:
—> Purchase or Repair:
We need immediate assistance with the ANILAM WIZARD 450 A245300. The unit is still down and we require support ASAP. Kindly prioritize this issue and provide a
—> Purchase or Repair:
—> Purchase or Repair:
Unit Anilam Wizzard A1662000000 caused downtime yesterday on the afternoon shift. The digital readout malfunctioned, leading to production delays. Please provide feedback on what caused the issue and when it can be resolved. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Hi, the Anilam WIZARD 211 A221300 is displaying error code ER3. Machine is not responding to any inputs. Can you provide assistance ASAP?
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam Wizard 150 70000291 is displaying error code E2. The spindle motor is not running and the machine is unable to start up properly. Please advise on troubleshooting steps. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
When I booted machine COMS battery state lowStandard COMS setupAdvance COMS setupauto configuration with BIOS defaultsauto configuration with power on defaultschange passwordauto detect hard diskauto detect hard disk utilitywrite to COMS and exitdonot write to COMS and exitI dont know where batterie…Purchase or Repair: 
...
Show More
Show More
Looking for repair service for Anilam Wizard 111 A1480111 Digital Readout unit. Unit not displaying readings correctly, in need of diagnosis and repair. Thanks!
—> Purchase or Repair:
—> Purchase or Repair:
Drive or board failure on Anilam A1920001 controller while on rounds, need immediate attention to resolve the issue and minimize downtime.
—> Purchase or Repair:
—> Purchase or Repair:
Can the Anilam Wizard 111 A1480111 Digital Readout be repaired or replaced? Trying to check this off my to-do list.
—> Purchase or Repair:
—> Purchase or Repair:
Can the Anilam Electronics Corp. Series 1100 31900394 Control Unit be repaired or replaced? I'm looking to address this from my to-do list.
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam Electronics Corp. Series 1100 31900394 Control Unit in the warehouse is exhibiting unusual behavior. It is not performing its regular functions and seems to be malfunctioning.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, I'm reaching out regarding Anilam Wizard 350 A1920001, also known as Mini Wizard, on behalf of a client. They are experiencing some issues with the device and would like to get more information about the possible repairs or troubleshooting steps. Can you please provide guidance on how we can …Purchase or Repair: 
...
Show More
Show More
Anilam WIZARD 211 A221300 not displaying any numbers on the digital readout module.
—> Purchase or Repair:
—> Purchase or Repair:
The display unit on the Anilam Electronics Corp. Wizaed 350+ A1920001 is malfunctioning, causing a halt in production. This issue needs urgent attention to get the line back up and running smoothly.
—> Purchase or Repair:
—> Purchase or Repair:
Experiencing issues with Anilam Wizard 150 70000291. Need repair for this industrial unit as it's not functioning properly. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Anilam Wizard 450L A245210 is showing a blank screen with no power. Please advise on troubleshooting steps or possible solutions needed to get it up and running again.
—> Purchase or Repair:
—> Purchase or Repair:
The Z axis is inoperative, manual movement of the Z axis results in the power contactor tripping out. This is the same contactor that is controlled by the limit switches. When the machine is first powered up the Y,X servo motors are powered, the Z is not getting power.
—> Purchase or Repair:
—> Purchase or Repair:
I need assistance with my Anilam Wizard 350 Plus A1920001 Digital Display Module. The unit is currently down and I need to keep production running. Can you please let me know if you have one available for repair or for purchase? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Could you please confirm if the Anilam Electronics Corp. Wizaed 350+ A1920001 is still supported, and if replacement parts are available for this older model? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, I am following up on my previous message regarding the Anilam Patriot A1480001 Digital Readout. The unit is still down and I need assistance. Please ensure someone gets back to me
—> Purchase or Repair:
—> Purchase or Repair:
Sir, We have purchased 1 used Ernault Samoua milling Machine model ZHV-1.travels of the machine x,y,z are 710*270*400. Machine has been retrofittedwith Anilam Microprocessor model CRUSADER-2.problem with the machine isthat when machine is switched on, the display on the monitor is showingERROR-18 an…Purchase or Repair: 
...
Show More
Show More
The Anilam Wizard 350 Plus A1920001, a Digital Display Module, experienced downtime during our shift. We urgently need to investigate what went wrong and when it occurred to prevent further disruptions. Can you provide a quick update before the next shift starts?
—> Purchase or Repair:
—> Purchase or Repair:
Hello, we have an Anilam Wizard 211 A221200 Display/Control Module that has stopped working. We are in need of a replacement part or repair service. Could you please provide me with repair information? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam A1920001 controller is displaying Error Code E102. The machine is not responding to any commands and there is a constant humming noise coming from the internal components. Please advise on necessary actions to troubleshoot and resolve the issue.
—> Purchase or Repair:
—> Purchase or Repair:
Hey there, we're in need of repair information for an Anilam A1920001 controller that stopped working. Can you please provide details on how we can get it fixed as soon as possible? Thanks!
—> Purchase or Repair:
—> Purchase or Repair:
Can you please confirm if the Anilam Wizard 350 Plus A1920002 control unit is still supported or if there are replacement parts available? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam WIZARD 211 A221300 is not functioning properly. Please look into it.
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam Patriot A1480001 unit is currently not functioning properly. The maintenance team is investigating the issue.
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam Wizard 111 A1480111 DRO unit has malfunctioned during the night shift. Please investigate and repair it as soon as possible during the day shift.
—> Purchase or Repair:
—> Purchase or Repair:
Hi there, can you please provide repair information for Anilam Mini Wizard A163-20000 XY Axis Controller? Thanks!
—> Purchase or Repair:
—> Purchase or Repair:
Anilam Wizard 350 Plus A1920001 is displaying a blank screen and not responding to any inputs.
—> Purchase or Repair:
—> Purchase or Repair:
I have an Anilam 1100 control that wont keep the cmos settings. The control starts to boot up but then tells me to push F2 to enter setup. I enter setup then save the changes but when I reboot the control does the same thing. What can be done to fix my problem?
—> Purchase or Repair:
—> Purchase or Repair:
I'm experiencing some issues with the Anilam Patriot A1480001 machine - the digital readout seems to have stopped working. I'm not entirely sure what the model does, but I think it's related to displaying measurements and data. Can you please assist with troubleshooting and fixing this problem? —> …Purchase or Repair: 
...
Show More
Show More
Anilam Wizard 211 A221200 digital readout module is malfunctioning, affecting the production line. Urgent repair needed to resume operations
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam Wizard 211 A221200 DRO module is displaying error code E1, preventing proper functionality.
—> Purchase or Repair:
—> Purchase or Repair:
Anilam Wizard 111 A1480111 DRO drive/board just failed, needs urgent attention before more machines affected. Heading to next machine, will update shortly.
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam WIZARD 211 A221300 is a Digital Readout Module that the maintenance team reported isn't working.
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam Patriot A1480001 digital readout unit is not functioning properly. Please have someone from the maintenance team take a look at it.
—> Purchase or Repair:
—> Purchase or Repair:
I am experiencing some issues with the Anilam Patriot A1480001 digital readout system. It seems like a part of the machine has stopped working properly. Would you be able to provide some guidance or assistance?
—> Purchase or Repair:
—> Purchase or Repair:
Hello, I'm interested in purchasing an Anilam Wizard 111 A1480111 DRO unit. Could you please provide me with information on pricing and availability? I am trying to source one quickly. Thank you!
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam Wizard 211 A221200 unit isn't working. The issue seems to be with the Display/Control Module.
—> Purchase or Repair:
—> Purchase or Repair:
One of the drives or boards on the Anilam Wizard 111 A1480111 digital readout just failed. Needed repairs ASAP.
—> Purchase or Repair:
—> Purchase or Repair:
Anilam Wizzard A1662000000 is displaying error code E-345. Machine is not detecting tool changes and prevents operation. Need immediate assistance to troubleshoot and resolve the issue.
—> Purchase or Repair:
—> Purchase or Repair:
I'm sorry to hear that your Anilam Wizzard A1662000000 digital readout is not functioning properly. I recommend reaching out to our technical support team for further assistance in diagnosing and resolving the issue. They should be able to help troubleshoot the problem and provide a solution. —> …Purchase or Repair: 
...
Show More
Show More
—> Purchase or Repair: